[Please help] SP FLASHTOOL BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) / FLASHING TECNO CAMON CM
[Please help] SP FLASHTOOL BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) / FLASHING TECNO CAMON CM
(30-12-2018, 09:50 PM)Charisma007 I downloaded tecno camon cm firmware here earlier today but sp flashtool keeps govin error messag when ever i try to flash the firmware
SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) [H/W] Fail to download DA to baseband chip's internal SRAM [HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply. [ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.
(31-12-2018, 09:00 AM)innagee(30-12-2018, 09:50 PM)Charisma007 I downloaded tecno camon cm firmware here earlier today but sp flashtool keeps govin error messag when ever i try to flash the firmware
SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) [H/W] Fail to download DA to baseband chip's internal SRAM [HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply. [ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.
The phone requires a Download Agent, download @ https://www.hovatek.com/forum/thread-23243.html
Also, it would help to know what's wrong with the phone.
Sent from my M5 mini using Hovatek Mobile
(31-12-2018, 04:55 PM)Charisma007 i used download agent and it flashed the phone but the phone wont boot up anymore
(31-12-2018, 05:41 PM)hovatek(31-12-2018, 04:55 PM)Charisma007 i used download agent and it flashed the phone but the phone wont boot up anymore
Leave the phone to charge a while then try powering on.
What was your phone's build number before flashing and which firmware (build number) did you flash?
(01-01-2019, 06:05 AM)Charisma007 honestly i don't know the build number , the phone was soft bricked before i flashed it,went into recovery but there was no build number, just the SOC version. so i decided to flash this build CA6-H3721B-N-180117V34
(01-01-2019, 01:46 PM)X3nonits an inbuilt battery please(01-01-2019, 06:05 AM)Charisma007 honestly i don't know the build number , the phone was soft bricked before i flashed it,went into recovery but there was no build number, just the SOC version. so i decided to flash this build CA6-H3721B-N-180117V34
try disconnecting / reconnecting the battery and lets know if the device still remains dead
(02-01-2019, 02:17 PM)Charisma007 its an inbuilt battery please
