[EsperaKING]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

[Olaniyan]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

[EsperaKING]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

Here is the current build number : Tecno W5-H373B1-M-160909V230
And I've tried flashing the MT6737M and SP Flash tool stays stuck on flashing bootloader for 1 min and 14 sec... Followed by a ERROR SF T DOWNLOAD 4008

[Olaniyan]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

Here is the current build number : Tecno W5-H373B1-M-160909V230
And I've tried flashing the MT6737M and SP Flash tool stays stuck on flashing bootloader for 1 min and 14 sec... Followed by a ERROR SF T DOWNLOAD 4008

You  mean when your phone was healthy_MTK6735...the build number is W5-H373B1-M-160909V230? If yes...
You can only flash the rom with miracle box because it was stated from where you got it that "Tecno W5 [Miracle Box] (W5-H373B1-M-160909V230)"
Provided that was the healthy rom according to your healthy build number, learn how to flash rom via miracle box here
https://www.hovatek.com/forum/thread-14106.html

[EsperaKING]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

Here is the current build number : Tecno W5-H373B1-M-160909V230
And I've tried flashing the MT6737M and SP Flash tool stays stuck on flashing bootloader for 1 min and 14 sec... Followed by a ERROR SF T DOWNLOAD 4008

You  mean when your phone was healthy_MTK6735...the build number is W5-H373B1-M-160909V230? If yes...
You can only flash the rom with miracle box because it was stated from where you got it that "Tecno W5 [Miracle Box] (W5-H373B1-M-160909V230)"
Provided that was the healthy rom according to your healthy build number, learn how to flash rom via miracle box here
https://www.hovatek.com/forum/thread-14106.html

I've downloaded that but all the partitions aren't shown for restoration in Miracle Box...

[Olaniyan]

Hello!!!
I've got an TECNO W5 stuck on bootloop. It only show TECNO when powered on and stay stuck on it. I've downlaoded the firmware from here... But it's not working. It never get pass the bootloader flash in SP Flash Tool.
And I've suspected something. I've used Miracle Box to read the phone Info but it's says it's TECNO W5 branded with an MT6735... But all the firmwares for the W5 am downloading from here are for the MT6737M chip. It's a bit weird.
Anyways, that's it...
Any help would be greatly appreicated.
Thanks...

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

Here is the current build number : Tecno W5-H373B1-M-160909V230
And I've tried flashing the MT6737M and SP Flash tool stays stuck on flashing bootloader for 1 min and 14 sec... Followed by a ERROR SF T DOWNLOAD 4008

You  mean when your phone was healthy_MTK6735...the build number is W5-H373B1-M-160909V230? If yes...
You can only flash the rom with miracle box because it was stated from where you got it that "Tecno W5 [Miracle Box] (W5-H373B1-M-160909V230)"
Provided that was the healthy rom according to your healthy build number, learn how to flash rom via miracle box here
https://www.hovatek.com/forum/thread-14106.html

I've downloaded that but all the partitions aren't shown for restoration in Miracle Box...

You just have to select the scatter file only and miracle box does the rest of attaching the bins and img files for flashing

[EsperaKING]

Do you remember the phones's build number ?
Have you flashed the MT6737M and what was the result?

Here is the current build number : Tecno W5-H373B1-M-160909V230
And I've tried flashing the MT6737M and SP Flash tool stays stuck on flashing bootloader for 1 min and 14 sec... Followed by a ERROR SF T DOWNLOAD 4008

You  mean when your phone was healthy_MTK6735...the build number is W5-H373B1-M-160909V230? If yes...
You can only flash the rom with miracle box because it was stated from where you got it that "Tecno W5 [Miracle Box] (W5-H373B1-M-160909V230)"
Provided that was the healthy rom according to your healthy build number, learn how to flash rom via miracle box here
https://www.hovatek.com/forum/thread-14106.html

I've downloaded that but all the partitions aren't shown for restoration in Miracle Box...

You just have to select the scatter file only and miracle box does the rest of attaching the bins and img files for flashing

When I select the scatter file, there is only preloader, logo and lk partitions that are attached... I'll try again and let you know

[EsperaKING]

Well, I've tried again. This times all the partitions were selected and when I click next it start write Nand/emmc and does nothing and then Done.
Seems like it can't start the flashing... Maybe an hardware issue

[Olaniyan]

Well, I've tried again. This times all the partitions were selected and when I click next it start write Nand/emmc and does nothing and then Done.
Seems like it can't start the flashing... Maybe an hardware issue

I hope you did select 8th boot under boot options?

[EsperaKING]

Well, I've tried again. This times all the partitions were selected and when I click next it start write Nand/emmc and does nothing and then Done.
Seems like it can't start the flashing... Maybe an hardware issue

I hope you did select 8th boot under boot options?

Yes I did, the phone is recognized and connected to miracle box... And also after some times, Miracle Box closes by itself...I don't know why