Talk with a Hovatek Engineer/Developer. Start Now

Learn Mediatek Software Repairs Online! Enroll



  1. Hovatek Forum
  2. MOBILE PHONES / WATCHES / TABLETS HELP SECTION
  3. Android

need firmware j6 pro clone
https://www.hovatek.com/forum/images/default_avatar.png
Ricardo Richie
Newbie
Posts: 3
Threads: 1
Joined: Nov 2018
Reputation: 0
#1

Post: 1 by Ricardo Richie

20-12-2018, 02:55 PM


please forum help me i have this copy of samsung sm-j6 pro clone so its hang on logo please i need firmware to soft this matter
this is the logs below

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040508A1A654714B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040508A1A654714B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xFD783269F45F97F598F851187B1AE91E
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Samsung
ProdName : SM-J6 Pro
ProdModel : SM-J6 Pro
Device : SM-J6 Pro
AndroidVer: 7.1.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

find 140338 Find
find Reply
https://www.hovatek.com/forum/uploads/avatars/avatar_62968.png?dateline=1564754741
xerxes
Senior Member
*****
Posts: 8,354
Threads: 191
Joined: Jun 2015
Reputation: 95
#2

Post: 2 by xerxes

20-12-2018, 10:56 PM
(20-12-2018, 02:55 PM)Ricardo Richie Wrote:  please forum help me i have this copy of samsung sm-j6 pro clone so its hang on logo please i need firmware to soft this matter
this is the logs below

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040508A1A654714B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040508A1A654714B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xFD783269F45F97F598F851187B1AE91E
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Samsung
ProdName : SM-J6 Pro
ProdModel : SM-J6 Pro
Device : SM-J6 Pro
AndroidVer: 7.1.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

How did the problem start?
Backup the phone's current firmware, it's very important.

Sent from my M5 mini using Hovatek Mobile
find 62968 Find
find Reply
https://www.hovatek.com/forum/uploads/avatars/avatar_27649.jpg?dateline=1534212833
EMMANUS
Senior Member
*****
Posts: 1,677
Threads: 19
Joined: Nov 2015
Reputation: 25
#3

Post: 3 by EMMANUS

21-12-2018, 07:58 AM
Also, have you tried a factory reset from recovery?
(This post was last modified: 21-12-2018, 08:01 AM by EMMANUS.)
find 27649 Find
find Reply
https://www.hovatek.com/forum/images/default_avatar.png
Ricardo Richie
Newbie
Posts: 3
Threads: 1
Joined: Nov 2018
Reputation: 0
#4

Post: 4 by Ricardo Richie

21-12-2018, 10:27 AM
(21-12-2018, 07:58 AM)EMMANUS Wrote:  Also, have you tried a factory reset from recovery?

i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system
find 140338 Find
find Reply
https://www.hovatek.com/forum/images/default_avatar.png
Ricardo Richie
Newbie
Posts: 3
Threads: 1
Joined: Nov 2018
Reputation: 0
#5

Post: 5 by Ricardo Richie

21-12-2018, 10:40 AM
(21-12-2018, 07:58 AM)EMMANUS Wrote:  Also, have you tried a factory reset from recovery?

i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system
find 140338 Find
find Reply
https://www.hovatek.com/forum/uploads/avatars/avatar_1116.jpg?dateline=1444328259
X3non
Recognized Contributor
*****
Posts: 22,062
Threads: 571
Joined: Jul 2014
Reputation: 332
#6

Post: 6 by X3non

21-12-2018, 04:25 PM
(21-12-2018, 10:40 AM)Ricardo Richie Wrote:  i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system

ran a quick search, the results all require some sort of payment
do you have access to a working J6 pro clone?

try this file at https://pan.baidu.com/s/1i5FIJsD?fid=1022092638780186
flash only boot and system
find 1116 Find
find Reply
https://www.hovatek.com/forum/images/default_avatar.png
MrBlue
Newbie
Posts: 1
Threads: 0
Joined: Feb 2019
Reputation: 0
#7

Post: 7 by MrBlue

13-02-2019, 05:27 PM
(21-12-2018, 04:25 PM)I need a traslator for chinesse ::DCan you upload to mega.nz please. X3non Wrote:  
(21-12-2018, 10:40 AM)Ricardo Richie Wrote:  i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system

ran a quick search, the results all require some sort of payment
do you have access to a working J6 pro clone?

try this file at https://pan.baidu.com/s/1i5FIJsD?fid=1022092638780186
flash only boot and system
find 156907 Find
find Reply
https://www.hovatek.com/forum/uploads/avatars/avatar_62968.png?dateline=1564754741
xerxes
Senior Member
*****
Posts: 8,354
Threads: 191
Joined: Jun 2015
Reputation: 95
#8

Post: 8 by xerxes

13-02-2019, 08:33 PM
(13-02-2019, 05:27 PM)MrBlue Wrote:  
(21-12-2018, 04:25 PM)I need a traslator for chinesse ::DCan you upload to mega.nz please. X3non Wrote:  
(21-12-2018, 10:40 AM)Ricardo Richie Wrote:  i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system

ran a quick search, the results all require some sort of payment
do you have access to a working J6 pro clone?

try this file at https://pan.baidu.com/s/1i5FIJsD?fid=1022092638780186
flash only boot and system

If you're having issue downloading then refer to https://www.hovatek.com/forum/thread-20892.html
find 62968 Find
find Reply
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
YouTubeWhatsappTelegram

© 2023. Powered by Hovatek...just a button away! Software by MyBB.