Hovatek Forum MOBILE Android TECNO RA6S

TECNO RA6S

TECNO RA6S

Tumaini Maluki
Tumaini Maluki
Tumaini Maluki
Junior Member
15
17-12-2018, 01:28 PM
#1



hi. need to remove frp on tecno (mtk 6739) ra6s. looking for frp file/firmware. kindly advice
maxpayne
maxpayne
maxpayne
Intern
3,779
17-12-2018, 01:36 PM
#2
(17-12-2018, 01:28 PM)Tumaini Maluki hi. need to remove frp on tecno (mtk 6739) ra6s. looking for frp file/firmware. kindly advice

Grab the DA file for your model at https://www.hovatek.com/forum/thread-23243.html
Dump your phone's rom using wwr at https://www.hovatek.com/forum/thread-21970.html (to get your scatter file)
Format only FRP partition using SP flash tool https://www.hovatek.com/forum/thread-21638.html
If you have a hardware box / dongle then just use the DA file & bypass frp


Sent from my Infinix X510 using Hovatek Mobile
Tumaini Maluki
Tumaini Maluki
Tumaini Maluki
Junior Member
15
18-12-2018, 07:04 AM
#3
(17-12-2018, 01:36 PM)juvette
(17-12-2018, 01:28 PM)Tumaini Maluki hi. need to remove frp on tecno (mtk 6739) ra6s. looking for frp file/firmware. kindly advice

Grab the DA file for your model at https://www.hovatek.com/forum/thread-23243.html
Dump your phone's rom using wwr at https://www.hovatek.com/forum/thread-21970.html (to get your scatter file)
Format only FRP partition using SP flash tool https://www.hovatek.com/forum/thread-21638.html
If you have a hardware box / dongle then just use the DA file & bypass frp


Sent from my Infinix X510 using Hovatek Mobile
hi thanks for the info. had a challenge coz the sp tools options was a dram flip test instead of the ram test. what data would i need to extract to do the scatter download?
xerxes
xerxes
xerxes
Senior Member
8,357
18-12-2018, 07:48 AM
#4
(18-12-2018, 07:04 AM)Tumaini Maluki
(17-12-2018, 01:36 PM)juvette
(17-12-2018, 01:28 PM)Tumaini Maluki hi. need to remove frp on tecno (mtk 6739) ra6s. looking for frp file/firmware. kindly advice

Grab the DA file for your model at https://www.hovatek.com/forum/thread-23243.html
Dump your phone's rom using wwr at https://www.hovatek.com/forum/thread-21970.html (to get your scatter file)
Format only FRP partition using SP flash tool https://www.hovatek.com/forum/thread-21638.html
If you have a hardware box / dongle then just use the DA file & bypass frp


Sent from my Infinix X510 using Hovatek Mobile
hi thanks for the info. had a challenge coz the sp tools options was a dram flip test instead of the ram test. what data would i need to extract to do the scatter download?

Check point no. 17, it's there on wwr guide.
If you try doing a RAM test but all you see in SP flash tool is DRAM flip test, then get the length needed to make a full ROM dump using the guide @ https://www.hovatek.com/forum/thread-22701.html


Sent from my M5 mini using Hovatek Mobile
This post was last modified: 18-12-2018, 06:37 PM by hovatek.
Tumaini Maluki
Tumaini Maluki
Tumaini Maluki
Junior Member
15
18-12-2018, 08:56 AM
#5



hi thanks for the info. had a challenge coz the sp tools options was a dram flip test instead of the ram test. what data would i need to extract to do the scatter download?
hovatek
hovatek
hovatek
Administrator
49,734
18-12-2018, 01:16 PM
#6
(18-12-2018, 08:56 AM)Tumaini Maluki hi thanks for the info. had a challenge coz the sp tools options was a dram flip test instead of the ram test. what data would i need to extract to do the scatter download?

follow the guide at https://www.hovatek.com/forum/thread-22701.html to get full length address needed to backup your firmware
Tumaini Maluki
Tumaini Maluki
Tumaini Maluki
Junior Member
15
19-12-2018, 01:31 PM
#7
hi. is there a firmware file for this phone? i must have bricked it coz its not powering on but responds to comp
hovatek
hovatek
hovatek
Administrator
49,734
19-12-2018, 02:44 PM
#8
(19-12-2018, 01:31 PM)Tumaini Maluki hi. is there a firmware file for this phone? i must have bricked it coz its not powering on but responds to comp

sadly, we don't have the firmware for this model yet
how exactly did the phone go totally dead?
maybe you just need to disconnect / reconnect the battery. did you try doing that?
Tumaini Maluki
Tumaini Maluki
Tumaini Maluki
Junior Member
15
20-12-2018, 11:32 AM
#9
hi. i formatted a partition (0x39e00000) , the phone rebooted and with msg that the phone cannot boot and gave two options i)try again ii)do a hard reset. did a hard reset twice. a try again once. in the morning it would not boot!!!!.
hovatek
hovatek
hovatek
Administrator
49,734
20-12-2018, 02:14 PM
#10
(20-12-2018, 11:32 AM)Tumaini Maluki hi. i formatted a partition (0x39e00000) , the phone rebooted and with msg that the phone cannot boot and gave two options i)try again ii)do a hard reset. did a hard reset twice. a try again once. in the morning it would not boot!!!!.

attach the scatter file from your wwr_mtk  dump
post the start length and partition size length you formatted
attach a picture of the error message you get on your phone
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt