MTK DEVICES BUILD No

[Please help] MTK DEVICES BUILD No

20

15-12-2018, 10:20 PM

#1

Hello there Guys,

Does anyone know how to get the Build Number of DEAD/HARD BRICKED MTK Devices?
I Have like 7 in my possesion but i can't Revive them coz i cannot get the build number for me to download the correct Firmware,

xerxes
Senior Member

8,357

16-12-2018, 02:04 PM

#2

(15-12-2018, 10:20 PM)Black Widower Hello there Guys,

Does anyone know how to get the Build Number of DEAD/HARD BRICKED MTK Devices?
I Have like 7 in my possesion but i can't Revive them coz i cannot get the build number for me to download the correct Firmware,

Refer to https://www.hovatek.com/forum/thread-16005.html

Sent from my M5 mini using Hovatek Mobile

Black Widower
Junior Member

20

16-12-2018, 05:22 PM

#3

(16-12-2018, 02:04 PM)innagee
(15-12-2018, 10:20 PM)Black Widower Hello there Guys,

Does anyone know how to get the Build Number of DEAD/HARD BRICKED MTK Devices?
I Have like 7 in my possesion but i can't Revive them coz i cannot get the build number for me to download the correct Firmware,

Refer to https://www.hovatek.com/forum/thread-16005.html

Sent from my M5 mini using Hovatek Mobile

Most of these methods can only be applied on phones that can boot either to the system or Recovery or Factory mode,the motherboard method is not applicable on many models.

EMMANUS
Senior Member

1,677

16-12-2018, 06:19 PM

#4

Let's take those devices one per thread.
That means you have to create a thread (post) for each one.
To make things easier, when you create each one, attach ;
1 Picture of the board showing any labels and writing on the board.
2 Sticker at the battery compartment.
3 Front of the phone (optional)
4 State the problem of the phone before it totally went dead.
5 Post screenshot of the contents of the firmware that bricked the phone.

This is to speed up the process.

hovatek
Administrator

49,753

17-12-2018, 01:14 PM

#5

(16-12-2018, 05:22 PM)Black Widower Most of these methods can only be applied on phones that can boot either to the system or Recovery or Factory mode,the motherboard method is not applicable on many models.

It depends on the level of bricking. Methods like read info & full dump are specifically for MTK phones that can't boot up.
If the device can't get detected by PC at all then you've got another problem entirely on your hands. PCB jumpers are what you would be considering

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions