Join us on Tl   Wh

Hovatek Forum MOBILE Android tecno p701 error 4032 sp flashtools

tecno p701 error 4032 sp flashtools

tecno p701 error 4032 sp flashtools

Pages (2): 1 2 Next
mayo12345
mayo12345
mayo12345
Enthusiastic Member
9
12-12-2018, 04:02 PM
#1



Hi
I have a problem with my tablet tecno p701 after flashing the rom found in the furom my tablet does not start every time I try to flash a 4032 error appears on sp flashtool.
I even change the drivers nothing changes I used other pc nothing works currently I do not know what to do.
sorry for my bad english!!
xerxes
xerxes
xerxes
Senior Member
8,357
12-12-2018, 07:20 PM
#2
(12-12-2018, 04:02 PM)mayo12345 Hi
I have a problem with my tablet tecno p701 after flashing the rom found in the furom my tablet does not start every time I try to flash a 4032 error appears on sp flashtool.
I even change the drivers nothing changes I used other pc nothing works currently I do not know what to do.
sorry for my bad english!!

Was flashing the firmware you downloaded on our forum successful or interrupted with an error?

Sent from my M5 mini using Hovatek Mobile
mayo12345
mayo12345
mayo12345
Enthusiastic Member
9
12-12-2018, 09:07 PM
#3
yes i just got a green ok with sp flashtools
hovatek
hovatek
hovatek
Administrator
49,761
12-12-2018, 09:46 PM
#4
(12-12-2018, 09:07 PM)mayo12345 yes i just got a green ok with sp flashtools

do you remember the original build number of your device before you flashed it?
meanwhile disconnect / reconnect the battery of the device [you will need to loosen the back cover to achieve this] then lets know if the phone still remains totally dead
mayo12345
mayo12345
mayo12345
Enthusiastic Member
9
17-12-2018, 12:20 AM
#5



(12-12-2018, 09:46 PM)X3non
(12-12-2018, 09:07 PM)mayo12345 yes i just got a green ok with sp flashtools

do you remember the original build number of your device before you flashed it?
meanwhile disconnect / reconnect the battery of the device [you will need to loosen the back cover to achieve this] then lets know if the phone still remains totally dead


I opened the device and I disconnected the battery and reconnected and I tried the flash but nothing works
Whenever I plug the device into the computer the mediatek device appears in the device manager.
I hope it's not dead
hovatek
hovatek
hovatek
Administrator
49,761
17-12-2018, 03:10 PM
#6
(17-12-2018, 12:20 AM)mayo12345 I opened the device and I disconnected the battery and reconnected and I tried the flash but nothing works
Whenever I plug the device into the computer the mediatek device appears in the device manager.
I hope it's not dead

What was wrong with the phone before you decided to flash?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
dfanumudu
dfanumudu
dfanumudu
Newbie
4
27-12-2018, 11:56 AM
#7
I have the same issue. My child setup some features and security code that made the phone unaccessible, the moment the phone powers, it request for security. I tried flashing with sp tool and phone refused to power again
hovatek
hovatek
hovatek
Administrator
49,761
27-12-2018, 12:18 PM
#8
(27-12-2018, 11:56 AM)dfanumudu I have the same issue. My child setup some features and security code that made the phone unaccessible, the moment the phone powers, it request for security. I tried flashing with sp tool and phone refused to power again

this is someone else's thread, create a new thread for your device issue
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
29-12-2018, 12:29 PM
#9
(17-12-2018, 12:20 AM)mayo12345
(12-12-2018, 09:46 PM)X3non
(12-12-2018, 09:07 PM)mayo12345 yes i just got a green ok with sp flashtools

do you remember the original build number of your device before you flashed it?
meanwhile disconnect / reconnect the battery of the device [you will need to loosen the back cover to achieve this] then lets know if the phone still remains totally dead


I opened the device and I disconnected the battery and reconnected and I tried the flash but nothing works
Whenever I plug the device into the computer the mediatek device appears in the device manager.
I hope it's not dead
From your explanationse these are my deductions
You flashed a wrong firmware to your phone
that's why it went dead.
You still haven't got the correct firmware, that's why you get the error 4032.
How many firmwares do you have? List their full names.
Can you post zoomed pictures of the phone board?
mayo12345
mayo12345
mayo12345
Enthusiastic Member
9
18-01-2019, 08:35 AM
#10
yes I used a rom download on hovatek the Tecno P701 (P701-PB04A-N-170523V26)
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt