Hovatek Forum MOBILE Android Bluboo Maya MT6580 lost touchscreen calibration
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Bluboo Maya MT6580 lost touchscreen calibration

Bluboo Maya MT6580 lost touchscreen calibration

jayjayuk
jayjayuk
jayjayuk
Newbie
4
16-08-2018, 01:43 PM
#1



Hello,

I;m tring to fix my Bluboo maya that has lost touchscreen calibration after I wiped NVRAM

I managed to restore imei, and my wifi / bluetooth macs

However, my touch screen isn't right and i've been trying to use miracle box to write some defaults, but not had any luck so far.

In miracle box 2.27a (loader) i chose calibration, and write LCD defaults, it gets to 99% and then reports

Compete but data not found.

I'm a but of a noob with this, so any help appreciated. Thanks!
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
16-08-2018, 02:36 PM
#2
Have you tried a factory data reset?
jayjayuk
jayjayuk
jayjayuk
Newbie
4
16-08-2018, 02:53 PM
#3
(16-08-2018, 02:36 PM)EMMANUS Have you tried a factory data reset?

Yes i have, and tried flashing different stock roms.

I had to use SN Writer to get my imei etc back

Thankyou for reply
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
16-08-2018, 04:07 PM
#4
Can you get to factory test mode?

It is a volume down and power button combo
This post was last modified: 16-08-2018, 04:26 PM by X3non.
jayjayuk
jayjayuk
jayjayuk
Newbie
4
16-08-2018, 04:40 PM
#5



(16-08-2018, 04:07 PM)EMMANUS Can you get to factory test mode?

It is a volume down and power button combo

Hi there,

Yes i can,

have been here before and the test does the exact same, the bottom right hand part of the screen doesn't recognisse touch at all, but if i press the area just above it it will draw a line all the way to the bottom right corner.

This issue happened right after a corrupted rom flash, and others reported the exact same issue

Thanks again for response
X3non
X3non
X3non
Recognized Contributor
22,062
16-08-2018, 09:37 PM
#6
(16-08-2018, 04:40 PM)jayjayuk Hi there,

Yes i can,
have been here before and the test does the exact same, the bottom right hand part of the screen doesn't recognisse touch at all, but if i press the area just above it it will draw a line all the way to the bottom right corner.
This issue happened right after a corrupted rom flash, and others reported the exact same issue

Thanks again for response

can either you or any of the "others" get access to a working bluboo maya without this issue?
jayjayuk
jayjayuk
jayjayuk
Newbie
4
16-08-2018, 10:19 PM
#7
(16-08-2018, 09:37 PM)X3non
(16-08-2018, 04:40 PM)jayjayuk Hi there,

Yes i can,
have been here before and the test does the exact same, the bottom right hand part of the screen doesn't recognisse touch at all, but if i press the area just above it it will draw a line all the way to the bottom right corner.
This issue happened right after a corrupted rom flash, and others reported the exact same issue

Thanks again for response

can either you or any of the "others" get access to a working bluboo maya without this issue?

Sadly not, don't know anyone with a working Blueboo maya, was reaching out here in case there was a small chance someone here had one.

Might have to abandon hope with this one it seems.

Many thanks for your reply
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram