[Please help] Tecno Phantom 6 dead by itself
[Please help] Tecno Phantom 6 dead by itself
(22-05-2018, 01:01 PM)TIM OF GOD Hello everybody. I got a dead tecno A6 two days ago. The owner said that the devices was working fine before she connected it to a wall charger to have a little more charge (there was still some charge in the batt). A moment later she wanted to use it but the phone was dead.I tried to flash a stok rom but all the rom I tried ended up in this error in NCK mtk android module: Error[0xc0070004]: STATUS_DA_HASH_MISMATCH.Sp flash tool can't recognize the mtk scatters
The phone is ccompletely dead and battery is full as I disassembled the phone to charge the battery with a home-made charger.
Please help.
Here is the attachment of the nck error
(22-05-2018, 02:31 PM)X3non(22-05-2018, 01:01 PM)TIM OF GOD Hello everybody. I got a dead tecno A6 two days ago. The owner said that the devices was working fine before she connected it to a wall charger to have a little more charge (there was still some charge in the batt). A moment later she wanted to use it but the phone was dead.I tried to flash a stok rom but all the rom I tried ended up in this error in NCK mtk android module: Error[0xc0070004]: STATUS_DA_HASH_MISMATCH.Sp flash tool can't recognize the mtk scatters
The phone is ccompletely dead and battery is full as I disassembled the phone to charge the battery with a home-made charger.
Please help.
Here is the attachment of the nck error
how / where did you get the firmware you're trying to flash from?
and did you try using a different battery on the phone?
(23-05-2018, 12:35 AM)TIM OF GOD Thanks for replying.
I got the firmwares from Hovatek and tried to flash with nck box and spft. In fact I didn’t download the whole firmware. I’ve just download the test files that includes the scatter and some other .bin and .img files. Usually I downloaded thoses separates files first and try to flash them. As I download all of the concerned devices, I randomly flash them one by one until I get the working one. And then I download the full firmware for complete flash. But all the different firmwares of Tecno A6 on Hovatek are refusing to flash with that MISMATCH ERROR.
(23-05-2018, 11:38 AM)TIM OF GOD I tried that too with a brand new battery.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Miracle USB Port (COM13)
Boot mode: Brom
Phone detected...Please wait
Using Algo 3.
Helio MT6755 phone detected, swithing to helio api
Helio connect da error, aborting.
BBCHIP MT6755
Error[0xc0070004]: STATUS_DA_HASH_MISMATCH
Boot Fail.!!!.
All done.
(23-05-2018, 11:38 AM)TIM OF GOD I tried that too with a brand new battery.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Miracle USB Port (COM13)
Boot mode: Brom
Phone detected...Please wait
Using Algo 3.
Helio MT6755 phone detected, swithing to helio api
Helio connect da error, aborting.
BBCHIP MT6755
Error[0xc0070004]: STATUS_DA_HASH_MISMATCH
Boot Fail.!!!.
All done.
(23-05-2018, 11:38 AM)TIM OF GOD I tried that too with a brand new battery.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Miracle USB Port (COM13)
Boot mode: Brom
Phone detected...Please wait
Using Algo 3.
Helio MT6755 phone detected, swithing to helio api
Helio connect da error, aborting.
BBCHIP MT6755
Error[0xc0070004]: STATUS_DA_HASH_MISMATCH
Boot Fail.!!!.
All done.