[Please help] how to fix ivvi ck3-01, won't power on completely after formatting
[Please help] how to fix ivvi ck3-01, won't power on completely after formatting
(19-04-2018, 11:30 AM)hmsef hello, I used sp flash tool and I did the format all+download and it showed "OK" but now after the phone logo, it pops up a blank screen with 'up' and 'down'.
(19-04-2018, 03:02 PM)hovatek(19-04-2018, 11:30 AM)hmsef hello, I used sp flash tool and I did the format all+download and it showed "OK" but now after the phone logo, it pops up a blank screen with 'up' and 'down'
If you format without re-flashing the firmware then your phone will remain bricked. Flash back the stock rom / firmware
(04-05-2018, 05:21 PM)hmsef I did flash back the phone but it doesn't go beyond the blank screen which i have just attached the image. thanks.
(04-05-2018, 06:31 PM)X3non(04-05-2018, 05:21 PM)hmsef I did flash back the phone but it doesn't go beyond the blank screen which i have just attached the image. thanks.
after successfully flashing, the phone powers on to a blank screen
means yours is of a different build / variant; you need to look for and try flashing a different rom build
(05-06-2018, 08:20 AM)hmsef I have searched and only found two variants which are 1. V5.1.063.P1.170119.CK3-01-HSJK and 2. V5.1.056.P1.161109.CK3-01 respectively. I have tried both and flashed successfully but still doesn't go beyond the blank screen.
I did get another firmware but the content type is just 'file' not the like 'image files' or 'bin file' as such i can't load up it. so i don't know how to convert the content to such files that i can use with sp flash tools.
Any assistance is urgently needed. Thanks
(05-06-2018, 01:14 PM)hovatek For the third firmware which is just files, add extensions to the file names according to what you have in the other firmware
e.g boot to boot.img
lk to lk.bin
You can then try using the scatter file from one of the other firmware.
I suggest you flash only boot, recovery and system for a start from the third firmware
(05-06-2018, 08:20 AM)hmsef Evening, i tried it but i got an error message when loading the scatter file. Find attached the screen shot. Many thanks.
(04-05-2018, 06:31 PM)X3non(04-05-2018, 05:21 PM)hmsef I did flash back the phone but it doesn't go beyond the blank screen which i have just attached the image. thanks.
after successfully flashing, the phone powers on to a blank screen
means yours is of a different build / variant; you need to look for and try flashing a different rom build
I have searched and only found two variants which are 1. V5.1.063.P1.170119.CK3-01-HSJK and 2. V5.1.056.P1.161109.CK3-01 respectively. I have tried both and flashed successfully but still doesn't go beyond the blank screen.
I did get another firmware but the content type is just 'file' not the like 'image files' or 'bin file' as such i can't load up it. so i don't know how to convert the content to such files that i can use with sp flash tools.
Any assistance is urgently needed. Thanks
(07-06-2018, 02:03 PM)hmsef(05-06-2018, 01:14 PM)hovatek For the third firmware which is just files, add extensions to the file names according to what you have in the other firmware
e.g boot to boot.img
lk to lk.bin
You can then try using the scatter file from one of the other firmware.
I suggest you flash only boot, recovery and system for a start from the third firmware
Alright, many thanks. I'll do that right away and leave a feedback.
(07-06-2018, 05:42 PM)hmsef ...
(07-06-2018, 05:42 PM)hmsef ..
