Home Forum Blog Private Support Courses
Our courses are now on YouTube! Start Watching
Hovatek Forum OPERATING SYSTEMS Android Need firmware for Mobicell cherry tablet to fix unknown baseband

Need firmware for Mobicell cherry tablet to fix unknown baseband

Need firmware for Mobicell cherry tablet to fix unknown baseband

Pages (2): 1 2 Next
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
28-03-2018, 11:11 AM
#1



my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.
hovatek
hovatek
hovatek
Administrator
51,002
28-03-2018, 03:21 PM
#2
(28-03-2018, 11:11 AM)Bernard Chongo my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.

is yours single or dual sim?

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
28-03-2018, 03:47 PM
#3
(28-03-2018, 03:21 PM)X3non
(28-03-2018, 11:11 AM)Bernard Chongo my phone lost baseband and imei and i can not figure out which firmware to use on it. please help.

is yours single or dual sim?
Single sim
hovatek
hovatek
hovatek
Administrator
51,002
28-03-2018, 06:29 PM
#4
(28-03-2018, 03:47 PM)Bernard Chongo Single sim

stock rom for single sim @ http://www.mediafire.com/file/0kk5bnw4nc...22_4.4.zip
flash only secro, it should fix the unknown baseband

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
30-03-2018, 03:00 AM
#5

Mediatek Course Mediatek Course


flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.
Attached Files
.png
Screenshot (1266).png
Size: 81.22 KB / Downloads: 31
xerxes
xerxes
xerxes
Senior Member
10,420
30-03-2018, 09:26 AM
#6
(30-03-2018, 03:00 AM)Bernard Chongo flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.

It seems like the download was successful.
Take out/reinsert the battery then try powering it.
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
30-03-2018, 11:23 AM
#7
(30-03-2018, 09:26 AM)innagee
(30-03-2018, 03:00 AM)Bernard Chongo flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.

It seems like the download was successful.
Take out/reinsert the battery then try powering it.
The battery can not be removed and phone no responding to power button or cable to flash it again. behaving like a dead one.
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
30-03-2018, 03:59 PM
#8
(30-03-2018, 11:23 AM)Bernard Chongo
(30-03-2018, 09:26 AM)innagee
(30-03-2018, 03:00 AM)Bernard Chongo flashed the phone but now can not boot. Not sure what really went wrong. Here is what i did and could not get download okay massage.

It seems like the download was successful.
Take out/reinsert the battery then try powering it.
I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be  seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.
Attached Files
.png
mt1.png
Size: 106.72 KB / Downloads: 34
.png
mt2.png
Size: 524.83 KB / Downloads: 26
hovatek
hovatek
hovatek
Administrator
51,002
30-03-2018, 05:49 PM
#9
(30-03-2018, 03:59 PM)Bernard Chongo I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be  seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.

your phone is dead due to interruption, either loosen the phone and disconnect / reconnect the battery OR keep charging till it powers on
refer to https://www.hovatek.com/forum/thread-808.html

for the driver issue, doesn't matter if you are using 32bit and you only need one driver
uninstall all mtk drivers using usb deview @ https://www.hovatek.com/forum/thread-7660.html
reinstall vcom preloader driver using the guide @ https://www.hovatek.com/forum/thread-440.html

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Bernard Chongo
Bernard Chongo
Bernard Chongo
Junior Member
32
30-03-2018, 06:58 PM
#10
(30-03-2018, 05:49 PM)X3non
(30-03-2018, 03:59 PM)Bernard Chongo I noticed that media tek Preloader usb vcom driver is not installing on my pc. Only media tek DA USB VCOM. can be  seen. could that be the reason I did not get the download okay and fail to boot after flashing secro. Tried reinstalling the vcom drivers but only DA USB VCOM is appearing. what else can I do. I am using 32bit pc. Please help.

your phone is dead due to interruption, either loosen the phone and disconnect / reconnect the battery OR keep charging till it powers on

Thank you so much.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
WhTlYt