[emmatec]

Am Emma I need some help,,,I flashed my Tecno w5 with a wrong firmware and it's now dead , it can't switch on ,no charge,no vibration ...my w5 cpu is mt6737v and it was running on w5-H373B-M-170607v616, so I made a mistake an I flashed it with mt6737m w5-H373B1-M-160909v230 plz help thanks in advance

[X3non]

Am Emma I need some help,,,I flashed my Tecno w5 with a wrong firmware and it's now dead , it can't switch on ,no charge,no vibration ...my w5 cpu is mt6737v and it was running on w5-H373B-M-170607v616, so I made a mistake an I flashed it with mt6737m w5-H373B1-M-160909v230 plz help thanks in advance

this build "W5-H373B-M-170607v616" seems like an update; 
do you remember the previous build number of your device before updating?
was flashing successful with a green tick?

[emmatec]

Sir I don't remember the previous build number the flashing was successful with a tick

[emmatec]

But the process went successful with a green tick ,plz help sir

[X3non]

Sir I don't remember the previous build number the flashing was successful with a tick

try other W5 roms listed @ https://www.hovatek.com/forum/thread-19425.html starting with the rom with the most recent build date

[emmatec]

Sir I have tried all those ROMs but it just gives me error: s_ft-enabe_dram_fail (4032)

[xerxes]

But the process went successful with a green tick ,plz  help sir

Have you tried charging the phone properly? Because the battery might be drained.

[hovatek]

Sir I have tried all those ROMs but it just gives me error: s_ft-enabe_dram_fail (4032)

That's a mismatch error. I need to verify some things. Attach a full screenshot of this error for EACH of the roms you tried flashing.

[emmatec]

Sir after all this i have managed to get a working phone of the same type and i have copied the file using Miracle box, so it has accepted to write the file to my phone, but after writing it's stuck on logo ,Now am trying again the files which were not accepting with sp tool but everything well now. thanks for your support

[xerxes]

Sir after all this i have managed to get a working phone of the same type and i have copied the file using Miracle box, so it has accepted to write the file to my phone, but after writing it's stuck on logo ,Now am trying again the files which were not accepting with sp tool but everything well now. thanks for your support

Happy for you!
Kindly upload the firmware backup you made from the working phone and drop the link for the sake of others in your shoes