We're hiring! Apply Now

Hovatek Forum MOBILE Android Huawei clone y625 stuck at logo

Huawei clone y625 stuck at logo

Huawei clone y625 stuck at logo

alimalamm
alimalamm
alimalamm
Senior Member
395
21-02-2018, 04:19 PM
#1



Hi! i have remove a code on a huawei clone y625 using miracle box. The operation was a success but when i on the phone. It just stuck at the logo and vibrate the hole time. The cpu is sc7731 emmc new. Please help me

Envoyé de mon SM-G386T1 avec Hovatek mobile
xerxes
xerxes
xerxes
Senior Member
8,361
21-02-2018, 05:55 PM
#2
(21-02-2018, 04:19 PM)alimalamm Hi!  i have remove a code on a huawei clone y625 using miracle box. The operation was a success but when i on the phone. It just stuck at the logo and vibrate the hole time. The cpu is sc7731 emmc new. Please help me

Envoyé de mon SM-G386T1 avec Hovatek mobile

Try wiping the phone in recovery (see https://www.hovatek.com/forum/thread-2167.html ) but if the issue persist you will have to flash the stock ROM.
This post was last modified: 21-02-2018, 05:56 PM by xerxes.
alimalamm
alimalamm
alimalamm
Senior Member
395
26-02-2018, 02:14 PM
#3
I did wipe the data in recovery mode but it still persist. I have look for the firmware online and i haven't seen any. It is a clone with spreadrum chipset. The other clones are mtk

Envoyé de mon SM-G386T1 avec Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,789
26-02-2018, 03:41 PM
#4
(26-02-2018, 02:14 PM)alimalamm I did wipe the data in recovery mode but it still persist. I have look for the firmware online and i haven't seen any. It is a clone with spreadrum chipset. The other clones are mtk

Envoyé de mon SM-G386T1 avec Hovatek mobile

you'll need to look for a working phone to take a firmware backup from then flash yours
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt