[planetegeek]

Hi all,

Yesterday i tried to flash my Blackview BV6000 with the "20160608_s12v55_jk_3m" Rom (which i downloaded from the official site), so i loaded the scatter file in SP FlashTool (v5.1620), checked all files (with the "download only" active), turned off the phone, plugged it to the PC (Win 7 ultimate x64) to install it with the "Mediatek USB VCOM(Android)" driver, unplugged, prepared the SP FlashTool (download), plugged the phone and the flash process went fine (Download OK mark), but when i tried to turn on the phone, simply wont turn on, so i left it charging for the rest of the night, but no use, it wont start and the PC won't recognize it anymore, so after a few hours searching on the internet, came across the MTK "META mode", so i tried to go through all the process in this mode (as it's the only way the computer will recognize it), but the problem is that SP Flashtool loads the starting red bar, but it won't continue, and the phone disconnects from the PC, after that gives me the BROM ERROR: STATUS_EXT_RAM_EXCEPTION

Tried on different ports, tried on my GF computer (Win 8 Pro x64), same results.

I also watched this thread and always the same : [Tutorial] How to use SP Flash Tool

I even disconnected the battery and nothing done.

Did anyone understand how to switch the smartphone into Meta-mode?


Thank

[hovatek]

Hi all,

Yesterday i tried to flash my Blackview BV6000 with the "20160608_s12v55_jk_3m" Rom (which i downloaded from the official site), so i loaded the scatter file in SP FlashTool (v5.1620), checked all files (with the "download only" active), turned off the phone, plugged it to the PC (Win 7 ultimate x64) to install it with the "Mediatek USB VCOM(Android)" driver, unplugged, prepared the SP FlashTool (download), plugged the phone and the flash process went fine (Download OK mark), but when i tried to turn on the phone, simply wont turn on, so i left it charging for the rest of the night, but no use, it wont start and the PC won't recognize it anymore, so after a few hours searching on the internet, came across the MTK "META mode", so i tried to go through all the process in this mode (as it's the only way the computer will recognize it), but the problem is that SP Flashtool loads the starting red bar, but it won't continue, and the phone disconnects from the PC, after that gives me the BROM ERROR: STATUS_EXT_RAM_EXCEPTION

Tried on different ports, tried on my GF computer (Win 8 Pro x64), same results.

I also watched this thread and always the same : [Tutorial] How to use SP Flash Tool

I even disconnected the battery and nothing done.

Did anyone understand how to switch the smartphone into Meta-mode?


Thank

The problem is likely from the rom you flashed.
1, Upload a full screenshot of the error message
2. Have you tried a different firmware