Hovatek Forum MOBILE Android Hotwav X14 dead-boot to Multi-Colored Screen
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Hotwav X14 dead-boot to Multi-Colored Screen

Hotwav X14 dead-boot to Multi-Colored Screen

buarmusa
buarmusa
buarmusa
Enthusiastic Member
13
03-01-2018, 11:28 AM
#1



Hi, please I'm having an issue with a Hotwav X14 SPD with dead boot problem, I flashed More than 20 times the same problem it goes, after then I decide to flash X11 File, I does flash but I got Multi-Clored screen and even after flashing the X14 file again, can you guys please assist me?
hovatek
hovatek
hovatek
Administrator
49,612
03-01-2018, 02:29 PM
#2
(03-01-2018, 11:28 AM)buarmusa Hi, please I'm having an issue with a Hotwav X14 SPD with dead boot problem, I flashed More than 20 times the same problem it goes, after then I decide to flash X11 File, I does flash but I got Multi-Clored screen and even after flashing the X14 file again, can you guys please assist me?

are you saying that you tried flashing one firmware 20 times or you've tried 20 different firmwares?

try combining files from two roms the flash,
use the X11 pac but replace only boot.img and uboot.bin with the files from X14 pac
buarmusa
buarmusa
buarmusa
Enthusiastic Member
13
04-01-2018, 10:03 AM
#3
(03-01-2018, 02:29 PM)X3non
(03-01-2018, 11:28 AM)buarmusa Hi, please I'm having an issue with a Hotwav X14 SPD with dead boot problem, I flashed More than 20 times the same problem it goes, after then I decide to flash X11 File, I does flash but I got Multi-Clored screen and even after flashing the X14 file again, can you guys please assist me?

are you saying that you tried flashing one firmware 20 times or you've tried 20 different firmwares?

try combining files from two roms the flash,
use the X11 pac but replace only boot.img and uboot.bin with the files from X14 pac

More than 20 times, just 1 firmware, although the other I downloaded was exactly as the first one, but how can I combine as .pac file comes in single?
hovatek
hovatek
hovatek
Administrator
49,612
04-01-2018, 10:47 AM
#4
(04-01-2018, 10:03 AM)buarmusa More than 20 times, just 1 firmware, although the other I downloaded was exactly as the first one, but how can I combine as .pac file comes in single?

First you extract both pac files using https://www.hovatek.com/forum/thread-6236.html and copy the content to different locations.
Now, when you load the pac file you wish to flash, you copy the files you intend to replace (from those you extracted earlier) then replace (the tool unpacks the pac file once loaded) before going ahead to flash

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl