[Studio]

I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks

[hovatek]

I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks

You need to flash a different firmware, preferably one of a higher Build

[Studio]

I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks

You need to flash a different firmware, preferably one of a higher Build

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

[hovatek]

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

[Studio]

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

Ok, lemme give it try n c hw it goes

[Studio]

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

Ok, lemme give it a try n c hw it goes

[Studio]

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?

[hovatek]

I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?

You'll have to keep trying roms for your model till you get the right variant
That or the emmc chip is damaged

[Studio]

I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?

You'll have to keep trying roms for your model till you get the right variant
That or the emmc chip is damaged

Alright sir, let just say it's a dead phone, (Five different stock roms and no positive result)