[Please help] TECNO S5 BRICKED AND DEAD
[Please help] TECNO S5 BRICKED AND DEAD
(29-11-2017, 12:15 PM)holatoj I used my phone till 11pm and i ran out of battery
I plugged to my pc saw it charging and slept off
i woke up 4am and met it at 81 percent
I later woke up 7am switched it on and it was stuck after loading the tecno logo, after a while i removed the baterry and restarted only to tell me i interrupted encryption process that i must reset my phone
I rebooted to CWM and i saw some errors i proceeded to wipe factory data reset and that was all.... Bricked
It will only stay on tecno and nothing more
I proceeded to flashing stock rom and encountered some few errors one of which tells me to format and download as a solution
I did so but now the phone wont power on and if i try to flash an error known as BROM Error 8?? Stops the flashing.....phone is dead but can still connect to system
I tried miracle box and this too will stop flashing procedure due to an error 0000.00
plz help me... Tecno s5
(29-11-2017, 12:15 PM)holatoj I used my phone till 11pm and i ran out of battery
I plugged to my pc saw it charging and slept off
i woke up 4am and met it at 81 percent
I later woke up 7am switched it on and it was stuck after loading the tecno logo, after a while i removed the baterry and restarted only to tell me i interrupted encryption process that i must reset my phone
I rebooted to CWM and i saw some errors i proceeded to wipe factory data reset and that was all.... Bricked
It will only stay on tecno and nothing more
I proceeded to flashing stock rom and encountered some few errors one of which tells me to format and download as a solution
I did so but now the phone wont power on and if i try to flash an error known as BROM Error 8?? Stops the flashing.....phone is dead but can still connect to system
I tried miracle box and this too will stop flashing procedure due to an error 0000.00
plz help me... Tecno s5
(29-11-2017, 08:15 PM)hovatek(29-11-2017, 12:15 PM)holatoj I used my phone till 11pm and i ran out of battery
I plugged to my pc saw it charging and slept off
i woke up 4am and met it at 81 percent
I later woke up 7am switched it on and it was stuck after loading the tecno logo, after a while i removed the baterry and restarted only to tell me i interrupted encryption process that i must reset my phone
I rebooted to CWM and i saw some errors i proceeded to wipe factory data reset and that was all.... Bricked
It will only stay on tecno and nothing more
I proceeded to flashing stock rom and encountered some few errors one of which tells me to format and download as a solution
I did so but now the phone wont power on and if i try to flash an error known as BROM Error 8?? Stops the flashing.....phone is dead but can still connect to system
I tried miracle box and this too will stop flashing procedure due to an error 0000.00
plz help me... Tecno s5
If you downloaded the firmware from https://www.hovatek.com/forum/thread-19472.html then you should stick to SP flash tool.
Attach a full screenshot of the error message
(29-11-2017, 08:15 PM)hovatek(29-11-2017, 12:15 PM)holatoj I used my phone till 11pm and i ran out of battery
I plugged to my pc saw it charging and slept off
i woke up 4am and met it at 81 percent
I later woke up 7am switched it on and it was stuck after loading the tecno logo, after a while i removed the baterry and restarted only to tell me i interrupted encryption process that i must reset my phone
I rebooted to CWM and i saw some errors i proceeded to wipe factory data reset and that was all.... Bricked
It will only stay on tecno and nothing more
I proceeded to flashing stock rom and encountered some few errors one of which tells me to format and download as a solution
I did so but now the phone wont power on and if i try to flash an error known as BROM Error 8?? Stops the flashing.....phone is dead but can still connect to system
I tried miracle box and this too will stop flashing procedure due to an error 0000.00
plz help me... Tecno s5
If you downloaded the firmware from https://www.hovatek.com/forum/thread-19472.html then you should stick to SP flash tool.
Attach a full screenshot of the error message
(03-12-2017, 07:40 AM)holatoj .
(04-12-2017, 11:18 AM)hovatek(03-12-2017, 07:40 AM)holatoj .
This is very likely an emmc chip problem. Try the fixes at https://www.hovatek.com/forum/thread-439.html
(29-11-2017, 12:15 PM)holatoj I used my phone till 11pm and i ran out of batteryi had same problem, just change flash tool version.
I plugged to my pc saw it charging and slept off
i woke up 4am and met it at 81 percent
I later woke up 7am switched it on and it was stuck after loading the tecno logo, after a while i removed the baterry and restarted only to tell me i interrupted encryption process that i must reset my phone
I rebooted to CWM and i saw some errors i proceeded to wipe factory data reset and that was all.... Bricked
It will only stay on tecno and nothing more
I proceeded to flashing stock rom and encountered some few errors one of which tells me to format and download as a solution
I did so but now the phone wont power on and if i try to flash an error known as BROM Error 8?? Stops the flashing.....phone is dead but can still connect to system
I tried miracle box and this too will stop flashing procedure due to an error 0000.00
plz help me... Tecno s5
