[sjaychill]

My phone has gone dead after reading with miracle box. The PC beeps on inserting the USB cord but nothing happens. SP tool is not recognizing it now.
Please help

[sjaychill]

My phone has gone dead after reading with miracle box. The PC beeps on inserting the USB cord but nothing happens. SP tool is not recognizing it now.
Please help

The MTK DA Vcom Port also appears on connecting to the PC

[xerxes]

My phone has gone dead after reading with miracle box. The PC beeps on inserting the USB cord but nothing happens. SP tool is not recognizing it now.
Please help

Take out/re-insert the battery then hold the power button for 5-10 seconds, if still no sign of power then it might be battery drainage.
Use an Original Charger to charge the phone for 3-4 hours.

[sjaychill]

My phone has gone dead after reading with miracle box. The PC beeps on inserting the USB cord but nothing happens. SP tool is not recognizing it now.
Please help

Take out/re-insert the battery then hold the power button for 5-10 seconds, if still no sign of power then it might be battery drainage.
Use an Original Charger to charge the phone for 3-4 hours.

The problem is my battery is inbuilt

[hovatek]

The problem is my battery is inbuilt

The process was likely interrupted. You'll need to keep charging. Refer to https://www.hovatek.com/forum/thread-808.html

[sjaychill]

The problem is my battery is inbuilt

The process was likely interrupted. You'll need to keep charging. Refer to https://www.hovatek.com/forum/thread-808.html

Thanks.
Grew impatient so I opened it up and unplugged the battery from the board for a while. It started working a while after.

[Auge KD]

My phone has gone dead after reading with miracle box. When charging it power on and turn off immediately. What should i do please

[X3non]

My phone has gone dead after reading with miracle box. When charging it power on and turn off immediately. What should i do please

see https://www.hovatek.com/forum/thread-808.html