Hovatek Forum MOBILE Android Bluboo S1 Baseband (MT6757P) unknown
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Bluboo S1 Baseband (MT6757P) unknown

Bluboo S1 Baseband (MT6757P) unknown

Pages (6): Previous 1 2 3 4 5 6 Next
xerxes
xerxes
xerxes
Senior Member
8,355
29-11-2017, 01:58 PM
#21



(29-11-2017, 11:32 AM)ManiacB Hi. Now i have the chance to get a working Phone.
How can I extract the files i need? With a backup via recovery?

Gesendet von meinem D6503 mit Tapatalk

You will need a custom recovery to backup.
Upload recovery.img and scatter file of the working phone.
or
Dump preloader, secro and nvram from the working phone using https://www.hovatek.com/forum/thread-13347.html then flash back to your phone using https://www.hovatek.com/forum/thread-14106.html
This post was last modified: 29-11-2017, 02:06 PM by xerxes.
hovatek
hovatek
hovatek
Administrator
49,570
29-11-2017, 08:06 PM
#22
You could also upload scatter file and recovery.img from the firmware

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ManiacB
ManiacB
ManiacB
Junior Member
27
01-12-2017, 06:39 AM
#23
Hi. I'm a little bit confused. Does it mean i don't need a working phone? The factory firmware is enough?

Gesendet von meinem D6503 mit Tapatalk
xerxes
xerxes
xerxes
Senior Member
8,355
01-12-2017, 11:11 AM
#24
(01-12-2017, 06:39 AM)ManiacB Hi. I'm a little bit confused. Does it mean i don't need a working phone?  The factory firmware is enough?

Gesendet von meinem D6503 mit Tapatalk

You need the working phone, you're going to take the backup from it.
First, you're to install custom recovery on both the phones to take back up of secro and nvram from the working device and restore on your device.
So we need the scatter file and recovery.img from the stock rom folder to port custom recovery and install on the working device.
This post was last modified: 01-12-2017, 11:22 AM by xerxes.
ManiacB
ManiacB
ManiacB
Junior Member
27
12-12-2017, 07:05 PM
#25



Hi!

I´m going crazy...

Now i have two Bluboo S1.One is completely ok the other still broken.

I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.

I have tried different drivers, switch of the Virus protection but no success.

Is it helpful to create a complete readback with SP Flashtool?
hovatek
hovatek
hovatek
Administrator
49,570
13-12-2017, 12:46 PM
#26
(12-12-2017, 07:05 PM)ManiacB Hi!

I´m going crazy...

Now i have two Bluboo S1.One is completely ok the other still broken.

I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.

I have tried different drivers, switch of the Virus protection but no success.

Is it helpful to create a complete readback with SP Flashtool?

There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear
This post was last modified: 13-12-2017, 12:47 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ManiacB
ManiacB
ManiacB
Junior Member
27
16-12-2017, 07:25 PM
#27
(13-12-2017, 12:46 PM)hovatek
(12-12-2017, 07:05 PM)ManiacB Hi!

I´m going crazy...

Now i have two Bluboo S1.One is completely ok the other still broken.

I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.

I have tried different drivers, switch of the Virus protection but no success.

Is it helpful to create a complete readback with SP Flashtool?

There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear

Ok, thank you.
So here is a link to the zip.

https://www.dropbox.com/s/ygdvuhzltc2goo...1.zip?dl=0
xerxes
xerxes
xerxes
Senior Member
8,355
18-12-2017, 01:11 PM
#28
(16-12-2017, 07:25 PM)ManiacB
(13-12-2017, 12:46 PM)hovatek
(12-12-2017, 07:05 PM)ManiacB Hi!

I´m going crazy...

Now i have two Bluboo S1.One is completely ok the other still broken.

I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.

I have tried different drivers, switch of the Virus protection but no success.

Is it helpful to create a complete readback with SP Flashtool?

There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear

Ok, thank you.
So here is a link to the zip.

https://www.dropbox.com/s/ygdvuhzltc2goo...1.zip?dl=0

Here's TWRP @ ...
Flash the TWRP on the working phone using SP flash tool, then backup Secro and NVRAM in TWRP
This post was last modified: 26-12-2017, 04:04 PM by X3non.
ManiacB
ManiacB
ManiacB
Junior Member
27
18-12-2017, 07:20 PM
#29
(18-12-2017, 01:11 PM)innagee
(16-12-2017, 07:25 PM)ManiacB
(13-12-2017, 12:46 PM)hovatek
(12-12-2017, 07:05 PM)ManiacB Hi!

I´m going crazy...

Now i have two Bluboo S1.One is completely ok the other still broken.

I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.

I have tried different drivers, switch of the Virus protection but no success.

Is it helpful to create a complete readback with SP Flashtool?

There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear

Ok, thank you.
So here is a link to the zip.

https://www.dropbox.com/s/ygdvuhzltc2goo...1.zip?dl=0

Here's TWRP @ https://mega.nz/#!VWwywaLB!g6wXhrAZ_sIAr...LD70N3qeP8
Flash the TWRP on the working phone using SP flash tool, then backup Secro and NVRAM in TWRP

I flashed the twrp successfully and try to backup nvram and secro. But there is no Partition with name secro.Nvram is no problem...
Has the secro partition another name?
hovatek
hovatek
hovatek
Administrator
49,570
19-12-2017, 09:38 AM
#30



(18-12-2017, 07:20 PM)ManiacB I flashed the twrp successfully and try to backup nvram and secro. But there is no Partition with name secro.Nvram is no problem...
Has the secro partition another name?

Can I see a picture of your phone in TWRP when trying to backup

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (6): Previous 1 2 3 4 5 6 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram