[omolestephen]

i'm having hard time,backing up/flashing roms(mt6580) or trying to remove or when i want to remove  anti-theft/frp with miracle+loader or gsm aladin.....i always get bootloader id error or phone ack  no found

[hovatek]

i'm having hard time,backing up/flashing roms(mt6580) or trying to remove or when i want to remove  anti-theft/frp with miracle+loader or gsm aladin.....i always get bootloader id error or phone ack  no found

Could you share screenshots of the errors

[omolestephen]

I was trying to remove anti-theft from tecno wx3 mt6580

[xerxes]

I was trying to remove anti-theft from tecno wx3 mt6580

Try taking out/in the battery and hold vol down while connecting.

[freshtyt]

I was trying to remove anti-theft from tecno wx3 mt6580

try @innagee's suggestion
do you also get the same error when you try to read the firmware?
and do you remember the build number of the phone?

[omolestephen]

I was trying to remove anti-theft from tecno wx3 mt6580

Try taking out/in the battery and hold vol down while connecting.

Same result......

[omolestephen]

I was trying to remove anti-theft from tecno wx3 mt6580

try @innagee's suggestion
do you also get the same error when you try to read the firmware?
and do you remember the build number of the phone?

I got same result while reading firmware

[maxxxiii]

I got same result while reading firmware

You're using the wrong tools.
You don't have the box so use the Miracle Box loader at https://www.hovatek.com/forum/thread-15700.html


Sent from my Infinix X510 using Hovatek Forum

[omolestephen]

I got same result while reading firmware

You're using the wrong tools.
You don't have the box so use the Miracle Box loader 


Sent from my Infinix X510 using Hovatek Forum

i'm using miracle+loader,i don't have the box..i want to know if the tools can perform the job?

[X3non]

i'm using miracle+loader,i don't have the box..i want to know if the tools can perform the job?

check our root guide @ https://www.hovatek.com/forum/thread-20801.html you'll notice miracle box was used to achieve root which means miracle box should work.
if for some weird reasons it doesn't, then try clearing FRP partition using SP flash tool
download scatter file @ https://www.hovatek.com/forum/thread-19615.html
open the scatter file using notepad++ and scroll down till you get to FRP
note the linear_start_addr and partition_size of FRP partition
in SPft, select the scatter file > click the format tab > manual format
begin address = linear_start_addr 
format length = partition_size