[Please help] Tecno W3 just showing Tecno on screen and not booting anymore
[Please help] Tecno W3 just showing Tecno on screen and not booting anymore
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.
Will the phone ever work again or can i be given step by step method on flashing the phone
Less i forget, i am using a windows 8 laptop, could that be the reason why its not working
To explain further, i used two versions of sp flash tool and i got the following responses:
1. When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2. When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).
The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.
I also used Miracle Box but this is the error message i got.
ERR 00: 5A
ERR 01: 00000000_5A000000
Please i really need help.
(05-09-2017, 01:17 PM)hovatek(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.
Will the phone ever work again or can i be given step by step method on flashing the phone
Less i forget, i am using a windows 8 laptop, could that be the reason why its not working
To explain further, i used two versions of sp flash tool and i got the following responses:
1. When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2. When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).
The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.
I also used Miracle Box but this is the error message i got.
ERR 00: 5A
ERR 01: 00000000_5A000000
Please i really need help.
If you downloaded that firmware from https://www.hovatek.com/forum/thread-311.html then its a Miracle Box dump .
You're supposed to flash using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html and not sp flash tool
Ensure to see the Miracle Box video and upload a screenshot of any error you get in Miracle Box
(06-09-2017, 07:17 AM)itsgboy(05-09-2017, 01:17 PM)hovatek(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.
Will the phone ever work again or can i be given step by step method on flashing the phone
Less i forget, i am using a windows 8 laptop, could that be the reason why its not working
To explain further, i used two versions of sp flash tool and i got the following responses:
1. When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2. When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).
The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.
I also used Miracle Box but this is the error message i got.
ERR 00: 5A
ERR 01: 00000000_5A000000
Please i really need help.
If you downloaded that firmware from https://www.hovatek.com/forum/thread-311.html then its a Miracle Box dump .
You're supposed to flash using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html and not sp flash tool
Ensure to see the Miracle Box video and upload a screenshot of any error you get in Miracle Box
I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000
Attached is the screenshot
i also decided to write the files one by one, so i unclicked the preloader and it gave me this error
Error: parti
attached is the screenshot
(06-09-2017, 07:17 AM)itsgboy I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000
Attached is the screenshot
(06-09-2017, 09:34 AM)X3non(06-09-2017, 07:17 AM)itsgboy I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000
Attached is the screenshot
either wrong firmware or broken emmc chip
do you remember the build number of your W3?
also Readinfo of your device using miracle box and post a screenshot here
This is the screenshot for my device. the firmware i used is TECNO W3-H806-A1-M-HiOS-20160612 and the build number of my device is id:W3-H806-A1-M-HiOS-20160612
(06-09-2017, 03:26 PM)itsgboy .
(07-09-2017, 10:00 AM)hovatek(06-09-2017, 03:26 PM)itsgboy .
Your phone's Build Number is W3-H806-A1-M-HIOS-20160612
Means its an A1 variant, not A2 as you'd earlier said.
Stick to the Miracle Box W3-H806-A1-M-HIOS-20160612 dump.
Now, for the Miracle Box error, which boxes / partitions were ticked when you were prompted?
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.
Will the phone ever work again or can i be given step by step method on flashing the phone
Less i forget, i am using a windows 8 laptop, could that be the reason why its not working
To explain further, i used two versions of sp flash tool and i got the following responses:
1. When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2. When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).
The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.
I also used Miracle Box but this is the error message i got.
ERR 00: 5A
ERR 01: 00000000_5A000000
Please i really need help.
First, dont give up yet. They are all really helping. These sort of things happens when the phone is not at hand.
now, if your flashfiles are in "bin" format then you make use of miracle box, but if they appear in "img" format, you make use of spflashtool.