[X3non]

The MyPhone Q-Smart II Plus (Q-Smart_II_PLUS_V1.0.2) is an MT6580 powered phone running on Android version: 6.0





How to root MyPhone Q-Smart II Plus running on Android 6.0 Marshmallow

• Install VCOM drivers on your PC using https://www.hovatek.com/forum/thread-440.html
  
• Download SuperSU 2.78.zip @ https://www.androidfilehost.com/?fid=457084094631642692
  
• Copy SuperSU.zip to both the phone’s SD card and internal storage
  
• Download CWM for MyPhone Q-Smart II Plus ported by Team Hovatek at https://drive.google.com/open?id=0B4S-Z7...HVvSFVPZVU
  
• Switch off the phone (still with battery inside)
  
• Backup your current firmware using the guide @ https://www.hovatek.com/forum/thread-13347.html
  
• Copy the preloader.bin from your firmware dump to the same folder as the CWM recovery image (ensure to replace any previous preloader.bin file)
  
• Flash both the preloader.bin and CWM recovery.bin to the phone using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
  
• Boot the phone into recovery mode using Volume up button + Power button
  
• In CWM recovery, you use the Volume buttons to navigate and Power button to select
  
• Select Install Zip
  
• Navigate to the location of the SuperSU2.78.zip on the Internal storage and select it
  
• Wait till flashing is complete
  
• If you are prompted to fix root, select No
  
• Reboot the phone normally
  
• Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en