[yasirsh]

i want a firmware for this tablet please
http://www12.0zz0.com/2017/04/12/18/282573586.jpg
there is no branch name on the tablet ,,
in pcb , s01 v2.1'
in recovery mode : exdroid 4.4.2_r2-a33-v2.0 
,,,i tried several firmwares from a33 but nothing work and the tablet now is dead ,,
i need an exact or working firmware for this tablet..
thanks

[hovatek]

i want a firmware for this tablet please
http://www12.0zz0.com/2017/04/12/18/282573586.jpg
there is no branch name on the tablet ,,
in pcb , s01 v2.1'
in recovery mode : exdroid 4.4.2_r2-a33-v2.0 
,,,i tried several firmwares from a33 but nothing work and the tablet now is dead ,,
i need an exact or working firmware for this tablet..
thanks

I'm unable to identify the device from the image. Was hoping the PCB would contain more info.
What's wrong with the tab, how did it happen and do you know its chipset?

[yasirsh]

there is a number in pcb ( s01_v2.1 2016.06.2)
,,
the tab was not openenig ,, stuck in logo .. tried to factory reset by recovery mode but not working still stuck in logo ...
so i searched for a firmware in google but i didn't find any exact firmware with the number in pcb ,, so i tried a several firmwares with a33 cpu but non of them worked ..

[hovatek]

there is a number in pcb ( s01_v2.1 2016.06.2)
,,
the tab was not openenig ,, stuck in logo .. tried to factory reset by recovery mode but not working still stuck in logo ...
so i searched for a firmware in google but i didn't find any exact firmware with the number in pcb ,, so i tried a several firmwares with a33 cpu but non of them worked ..

1. What's the logo that appeared? Any name?
2. How did it get stuck at logo, what was the last thing done on the tab before this issue?
3. Is the tab still able to come on (even if stuck at logo)

[yasirsh]

it was stuck in Android logo ,,
now the tablet is dead ,,, not working because i flashed a firmware dosn't match with the tablet

[hovatek]

it was stuck in Android logo ,,
now the tablet is dead ,,, not working because i flashed a firmware dosn't match with the tablet

Which tool did you use in flashing and did you get a 100% success message or an error during flashing?
Trying to ascertain the chipset

[yasirsh]

i use phoenix suit and there are no error messeges always finished at 100%

[hovatek]

i use phoenix suit and there are no error messeges always finished at 100%

So far, I don't have sufficient info to get the model or firmware. The image is a great clue but not for me, unfortunately.