Login

brianel · (This post was last modified: 10-03-2017, 03:16 PM by brianel.)

i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.

***hovatek*** · 10-03-2017, 05:54 PM

(10-03-2017, 03:14 PM)brianel Wrote: i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.

Have you tried charging the battery incase its drained?
Also, where did you download the ROM from?

brianel · 16-03-2017, 07:46 PM

(10-03-2017, 05:54 PM)hovatek Wrote:
(10-03-2017, 03:14 PM)brianel Wrote: i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.

Have you tried charging the battery incase its drained?
Also, where did you download the ROM from?

the battery is fully charged. i downloaded the rom from this site

xerxes · 16-03-2017, 09:17 PM

Did your first flashing successful? Or finish with errors?

Sent from my Z10 using Hovatek mobile

***hovatek*** · 17-03-2017, 01:59 PM

(16-03-2017, 07:46 PM)brianel Wrote: the battery is fully charged. i downloaded the rom from this site

Are you still able to successfully reflash the firmware?

brianel · 20-03-2017, 12:21 PM

(17-03-2017, 01:59 PM)hovatek Wrote:
(16-03-2017, 07:46 PM)brianel Wrote: the battery is fully charged. i downloaded the rom from this site

Are you still able to successfully reflash the firmware?

Yes, I am able to reflash the firmware. i have done it about 3 times and the problem still persists.

brianel · 20-03-2017, 12:22 PM

(16-03-2017, 09:17 PM)innagee Wrote: Did your first flashing successful? Or finish with errors?

Sent from my Z10 using Hovatek mobile

the flashing was successful. i have done it about 3 times but still same result.

***hovatek*** · (This post was last modified: 20-03-2017, 05:23 PM by hovatek.)

(20-03-2017, 12:21 PM)brianel Wrote: Yes, I am able to reflash the firmware. i have done it about 3 times and the problem still persists.

Connect to power while switched off. Does it show a steady charging sign? and what's the battery level if it does
Also, there are two variants listed @ https://www.hovatek.com/forum/thread-311.html , have you tried both?

xerxes · 20-03-2017, 07:22 PM

Download another rom for your device I think the first one is incompatible. Rom here: https://www.hovatek.com/forum/thread-311.html

Sent from my Z10 using Hovatek mobile

brianel · 21-03-2017, 06:18 PM

(20-03-2017, 05:22 PM)hovatek Wrote:
(20-03-2017, 12:21 PM)brianel Wrote: Yes, I am able to reflash the firmware. i have done it about 3 times and the problem still persists.

Connect to power while switched off. Does it show a steady charging sign? and what's the battery level if it does
Also, there are two variants listed @ https://www.hovatek.com/forum/thread-311.html , have you tried both?

When i connect to to a power source, it shows a steady charging sign. The battery level is about 80%.
Also i have tried both variants, but the result is the same

Possibly Related Threads…
Thread		Author	Replies	Views
	[Downloads] my phone wont start after hard reset and wont identify sim cards	rotieno	1	1,662
	My tecno M3 phone wont boot ends on boot logo and doesnt enter on recovery mod	Sentinel Warren	3	2,800
	[Please help] My Tecno P5 stuck in the boot sequence and wont boot to the home screen	vickielizabeths	23	14,399