[Please help] Vodafone VDF 300 Stuck a Startup with a rounding ball
[Please help] Vodafone VDF 300 Stuck a Startup with a rounding ball
(06-01-2017, 01:21 PM)christopher isohe Dear Hovatek Members,if flashing was successful, then
I have a Vodaphone Smart Mini 7 which was accidentally factory restored. After restarting it now needs to repair Google Factory Reset Protection. I used Infinity Box to clear settings. After restarting the phone it hangs/stuck on startup for hours now "A rounding ball appears". I did try to flash with this firmware Vodafone_VFD_300_MT6580_6.0_V2.34_JHZ6580_P23 but still it is stuck with a rounding ball at startup.
...
(06-01-2017, 01:21 PM)christopher isohe Dear Hovatek Members,
I have a Vodaphone Smart Mini 7 which was accidentally factory restored. After restarting it now needs to repair Google Factory Reset Protection. I used Infinity Box to clear settings. After restarting the phone it hangs/stuck on startup for hours now "A rounding ball appears". I did try to flash with this firmware Vodafone_VFD_300_MT6580_6.0_V2.34_JHZ6580_P23 but still it is stuck with a rounding ball at startup.
How do i revive my phone. Your assistance is highly appreciated.
The Smart phone with the following specifications:
Vodafone 300 firmware
CPU is Mediatek MT6580 ,
Brand : Vodafone
ProdName : Smart_mini7
ProdModel : VFD 300
Device : VFD300
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_jhz6580.weg.vf.m_P38
ADDITIONAL SPECIFICATION INFORMATION:
Boot Info :
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447453000A05C18843359
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453000A05C18843359
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
