[suxxi]

Please i need Techno F5 flash file. The phone was hard bricked when a wrong rom was flashed into the phone.I have a working techno f5, i have done mtk backup but the bricked phone refuse to flash.It gives me brom error: s_ft_enable-dram_fail (4032).
Hint, please check your load matches to your target which is to be downloaded. Please i need your help.Maybe i did not dump the rom well. So i need your F5 rom with the scatter file because mine says invalid scatter file even after i have created it from the working techno F5.
My email is: suxxi4real@gmail.com
Thank you as my you help me out.

[tonbari]

HW'D u brick it??

Sent from my TECNO F5 using Hovatek mobile

[hovatek]

Please i need Techno F5 flash file. The phone was hard bricked when a wrong rom was flashed into the phone.I have a working techno f5, i have done mtk backup but the bricked phone refuse to flash.It gives me brom error: s_ft_enable-dram_fail (4032).
Hint, please check your load matches to your target which is to be downloaded. Please i need your help.Maybe i did not dump the rom well. So i need your F5 rom with the scatter file because mine says invalid scatter file even after i have created it from the working techno F5.
My email is: suxxi4real@gmail.com
Thank you as my you help me out.

Your backup method sounds wrong. if you still have access to the working F5 then back it up using this guide @ https://www.hovatek.com/forum/thread-468.html
if you no longer have access then let me know so i grant you download permission

[suxxi]

The phone got bricked when i wanted to port Samsung galaxy Rom into the techno F5. Computer can still detect the phone but it does not charge or power on.If the battery is connected to the phone, computer will not detect the phone again.I have a working Techno F5 and its mtk backup,i have created the flash file but it refuse to flash.It gives the above error in the picture i attached.Please your help will be appreciated.Thanks

[hovatek]

The phone got bricked when i wanted to port Samsung galaxy Rom into the techno F5. Computer can still detect the phone but it does not charge or power on.If the battery is connected to the phone, computer will not detect the phone again.I have a working Techno F5 and its mtk backup,i have created the flash file but it refuse to flash.It gives the above error in the picture i attached.Please your help will be appreciated.Thanks

1. Go to MTK droid tools folder > backups and move everything there elsewhere so its empty
2. Run mtk droid tools 2.5.3 as admin and backup the working F5 using this guide @ https://www.hovatek.com/forum/thread-468.html
3. Uninstall all mtk and vcom drivers using USB deview then re-install using this guide @ https://www.hovatek.com/forum/thread-440.html
4. Delete the Sp flash tool folder then re-extract a fresh copy
5. Restart the PC
6. Flash the !files to flash folder from the newly created F5 backup using SP flash tool @ https://www.hovatek.com/forum/thread-159.html
....standing by