Gionee Stock rom bad zip file

[ham_samm]

Just downloaded Gionee m3 mini stock nd found out it nt zip but Rather rar file
N I can't flash

[hovatek]

Just downloaded Gionee m3 mini stock nd found out it nt zip but Rather rar file
N I can't flash

install 7zip or winrar and extract it.
You're to flash using SP flash tool @ https://www.hovatek.com/forum/thread-159.html

[ham_samm]

Just downloaded Gionee m3 mini stock nd found out it nt zip but Rather rar file
N I can't flash

install 7zip or winrar and extract it.
You're to flash using SP flash tool @ https://www.hovatek.com/forum/thread-159.html

alryt thanks done extracting
another problem

in the video (how to use sp flash tool),there are more than two drivers installed under PORT (COM & LPT)
bur i only have one driver installed
and i tried flashing when i connected my device it showed what is in the 2nd attachment

[hovatek]

alryt thanks done extracting
another problem
in the video (how to use sp flash tool),there are more than two drivers installed under PORT (COM & LPT)
bur i only have one driver installed
and i tried flashing when i connected my device it showed what is in the 2nd attachment

Connect the phone toPC with battery while off. Do not hold any button when connecting

[ham_samm]

alryt thanks done extracting
another problem
in the video (how to use sp flash tool),there are more than two drivers installed under PORT (COM & LPT)
bur i only have one driver installed
and i tried flashing when i connected my device it showed what is in the 2nd attachment

Connect the phone toPC with battery while off. Do not hold any button when connecting

i did that
it was just charging ntin dan dat
i waited for abt 15mins
ntin

hw abt d images, in d video it wasnt like dat     hope it doesnt affect it

[freshtyt]

i did that
it was just charging ntin dan dat
i waited for abt 15mins
ntin

hw abt d images, in d video it wasnt like dat     hope it doesnt affect it

you should try installing vcom preloader again
follow the guide at https://www.hovatek.com/forum/thread-440.html

[ham_samm]

alryt thanks done extracting
another problem
in the video (how to use sp flash tool),there are more than two drivers installed under PORT (COM & LPT)
bur i only have one driver installed
and i tried flashing when i connected my device it showed what is in the 2nd attachment

Connect the phone toPC with battery while off. Do not hold any button when connecting

i did that
it was just charging ntin dan dat
i waited for abt 15mins
ntin

hw abt d images, in d video it wasnt like dat     hope it doesnt affect it

you should try installing vcom preloader again
follow the guide at https://www.hovatek.com/forum/thread-440.html

thanks v much
it has been flashed
i really appreciate ur efforts

more grease to ur elbows

[chinexsky]

Hello admin... Am new here and I really need your help.... I root my gionee m5 so I mistakly format it without unroot and my phone got soft brick, only stock in startup logo... I need help to fix my phone back to life... I've tried factory reset and wipe chech partition, still won't work.. I also download gionee recovery using sp flash tool and follow instruction but I can't find MT6735_Android_Scatter.txt.... I only see MT6735_Andriod_Scatter... No .txt... Please help

[ham_samm]

Try download D stock rom[inside d zip or rar file, u will c D scatter file there] for your device and flash with sp flash

Sent from my M3mini using Hovatek mobile

[X3non]

Hello admin... Am new here and I really need your help.... I root my gionee m5 so I mistakly format it without unroot and my phone got soft brick, only stock in startup logo... I need help to fix my phone back to life... I've tried  factory reset and wipe chech partition, still won't work.. I also download gionee recovery using sp flash tool and follow instruction but I can't find MT6735_Android_Scatter.txt.... I only see MT6735_Andriod_Scatter... No .txt... Please help

create a new thread.. this is someone elses support thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread