[Please help] Android One Dead After Wrong Installation
[Please help] Android One Dead After Wrong Installation
(14-11-2016, 11:02 AM)vfxlab What i did exactly .
Mobile model : Micromax Canvas A1 Android One
1. my software was corrupted
2. I wipe data or partition may be from TWRP recovery on mobile.
not works then i done following steps .
1. Removed Battery
2. Installed the drivers for sp recovery tool and downloaded the correct rom files in pc.
3. In SP tool v5 seted DA file and scatter files
4. choosing frame wire upgrade option.
5. Its upgraded 100% successfully .
I guess the only worng thing is in step 3 i chooses DA_SWSEC.bin file Instead of MTK_AllInOne_DA.bin.
That i realised after done.
Phone is dead noting on screen , no battery charging single nothing .
Even micromax customer care said We can do anything :
Hope hovatek experts have solution for this.
hovatek i already added in skype but seems inactive there.
Thanks you in advance for your support.
(14-11-2016, 11:02 AM)vfxlab What i did exactly .
Mobile model : Micromax Canvas A1 Android One
1. my software was corrupted
2. I wipe data or partition may be from TWRP recovery on mobile.
not works then i done following steps .
1. Removed Battery
2. Installed the drivers for sp recovery tool and downloaded the correct rom files in pc.
3. In SP tool v5 seted DA file and scatter files
4. choosing frame wire upgrade option.
5. Its upgraded 100% successfully .
I guess the only worng thing is in step 3 i chooses DA_SWSEC.bin file Instead of MTK_AllInOne_DA.bin.
That i realised after done.
Phone is dead noting on screen , no battery charging single nothing .
Even micromax customer care said We can do anything :
Hope hovatek experts have solution for this.
hovatek i already added in skype but seems inactive there.
Thanks you in advance for your support.
(24-11-2016, 01:52 PM)vfxlab Yes My PC Connects Device , And Its Sound When its connect
even i can format from it , and download only from the sp tool.
But when i try to choose frame wire upgrade there is error called PTM in SP tool v5. and old v3 have same error.
Can you please join on my skype : vishu_poo (sure will pay the charges )
(27-11-2016, 02:48 PM)vfxlab Here you can see the error screen while i try to update fw.
http://i.imgur.com/udwzkoJ.jpg
http://i.imgur.com/rq1tI0D.jpg
and here is memory test report
http://i.imgur.com/Cp8i5I1.jpg
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000x (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000x(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000x(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000x(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000x(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000x(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000x(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000x(0MB)
EMMC_PART_USER Size = 0x00000000e9000000x(3728MB)
============ EMMC Test ============
(30-11-2016, 05:31 AM)vfxlab Yes I Have Same Phone Model Working.
What to do with it ?