[Lina2602]

http://j54i.imgup.net/IMG_2016113262.jpg


@
Hello dear,i hope to help me to solve this problem,i think the way to revive this phone is by pinout ,but i don t know how ,i will attach a picture of this phone thank in advance

[hovatek]

http://j54i.imgup.net/IMG_2016113262.jpg


@
Hello dear,i hope to help me to solve this problem,i think the way to revive this phone is by pinout ,but i don t know how ,i will attach a picture of this phone thank in advance

refer to https://www.hovatek.com/forum/thread-11836.html

[Lina2602]

Plz look at to picture for give the right way to solve this problem thanks

[Anyinature]

I can help you with the simple method to revive your dead phone.

kindly contact me on let me assist you with evry working tool u need.

i have seen this kind of issue before.

[hovatek]

Plz look at to picture  for give the right way to solve this problem thanks

Before you consider pinouts;
1. Was flashing of that firmware successful or it got interrupted
2. Does the PC make a sound when you connect the phone?
3. upload more pictures to show the entire board

[Lina2602]

Unfortunately, no sound in pc ,get interrputed flash

[hovatek]

Unfortunately, no sound in pc ,get interrputed flash

if its dead because flashing got interrupted then its possible that the battery has been totally drained (see https://www.hovatek.com/forum/thread-808.html )
still expecting the pictures

[Lina2602]

The phone not reconiziged by pc ,and battery is full ,i charge it by extern

[Lina2602]

The phone not reconiziged by pc ,and battery is full ,i charge it by extern

[hovatek]

The phone not reconiziged by pc ,and battery is full ,i charge it by extern

OK then.
Upload more pictures of the board then