huawei y600-u20 only vibrate after flashe
huawei y600-u20 only vibrate after flashe
(24-09-2016, 01:31 AM)MedoFoda i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.Seems like your eMMC chip is bad.
i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
(24-09-2016, 10:17 AM)matybazz(24-09-2016, 01:31 AM)MedoFoda i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.Seems like your eMMC chip is bad.
i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Needs to be replaced
How did it really start?
It Start After Flashe Y600-U20V100R001C435B012_DCC I did Formt Whole flashe and download firmware ( Format all + download) and then mobile is gone just vibrate on power on
(24-09-2016, 06:44 PM)matybazz(24-09-2016, 02:15 PM)MedoFoda It Start After Flashe Y600-U20V100R001C435B012_DCC I did Formt Whole flashe and download firmware ( Format all + download) and then mobile is gone just vibrate on power onYou will need to have your eMMC chip replaced take it to a hardware store
(24-09-2016, 01:31 AM)MedoFoda i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.
i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
(25-09-2016, 05:15 PM)hovatek(24-09-2016, 01:31 AM)MedoFoda i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.
i formatted it using sp flash tool.and flashe it . it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Seems like you'll need to try a different firmware.
Where did you download the firmware you flashed
(14-10-2016, 12:22 AM)MedoFoda My eMMC chip Is good
And i try
Y600-U20V100R001C435B018
Y600-U20 V100R001C435B01
Y600-U20V100R001C435B012
None of them work what can i do
(14-10-2016, 12:17 PM)hovatek(14-10-2016, 12:22 AM)MedoFoda My eMMC chip Is good
And i try
Y600-U20V100R001C435B018
Y600-U20 V100R001C435B01
Y600-U20V100R001C435B012
None of them work what can i do
1. Were you able to successfully flash the above firmware?
2. Have you tried taking out the battery and charging it?
(15-10-2016, 01:34 AM)MedoFoda all of them successfully done
and i try with new battery nothing change
but there is something i didn't till in first time flash .... i format whole flash and mark validation and use this firmware Y600-U20V100R001C435B018