[Please help] Wiko U Feel Lite/Cloudfone Thrill Access
[Please help] Wiko U Feel Lite/Cloudfone Thrill Access
(17-09-2016, 03:25 PM)gefffck1 ...
PS: I reflashed my original firmware and everything's working except TWRP it still says No OS Installed.
Can you help me please?
Thanks
(17-09-2016, 09:29 PM)X3non(17-09-2016, 03:25 PM)gefffck1 ...
PS: I reflashed my original firmware and everything's working except TWRP it still says No OS Installed.
Can you help me please?
Thanks
* if everything is working on the original firmware, simply backup secro and nvram partition then restore after flashing the wiko's official firmware
refer to the guide @ https://www.hovatek.com/forum/thread-14261.html
* for the twrp issue, try this
flash the stock recovery you provided for porting twrp > boot phone normally (ensure everything is working) > reboot to stock recovery > flash twrp > boot to twrp (check if you still get the error message)
BTW did you previously make any TWRP backup?
(18-09-2016, 04:41 AM)gefffck1 Thank you for answering
The sad part is that I can't get my miracle box v2.27A crack version work. The START BUTTON is greyed out. I have tried all the possible solution but it did not fix it. On the log screen it says there is a new version please update now.
I did make TWRP backup all of my partition from previous firmware but I can not restore it because it says no OS and it gets error during the restoration that's why I can not flash the secro and nvram backup.
(18-09-2016, 09:04 PM)X3non(18-09-2016, 04:41 AM)gefffck1 Thank you for answering
The sad part is that I can't get my miracle box v2.27A crack version work. The START BUTTON is greyed out. I have tried all the possible solution but it did not fix it. On the log screen it says there is a new version please update now.
I did make TWRP backup all of my partition from previous firmware but I can not restore it because it says no OS and it gets error during the restoration that's why I can not flash the secro and nvram backup.
* fix the inactive miracle button using the guide @ https://www.hovatek.com/forum/thread-14815.html
* whats the exact error message you get when you try to restore the TWRP backup?
* did you try the procedure i sent previously for the TWRP no os issue?
(23-09-2016, 01:03 PM)gefffck1 Hi sir,
After some time, I've under gone trial and error. Wiko firmware works fine but the TWRP you have ported for Cloudfone Thrill Access does not work on that FW. It does not say No OS Installed but it won't boot normally. Everytime I install TWRP my device gets bootlooped.
I think the problem is with the boot.img of wiko because when I replace it with cta's boot.img my device boots normally but a little slow compared to it's original boot.img and it's buggy when I use CTA's boot.img. I think it's because of different kernel.
So, if you may sir. Please kindly port me another TWRP? I would like it to be 3.0 : if that's not too much to ask.
Here is the boot.img and recovery.img based on WIKO U FEEL LITE FIRMWARE which I got officially from their site. https://mega.nz/#!z5IzXKzY!h4VWBTCsI-Cvo...QMw52UFBr8.
Results: I am very sure that the NVRAM of CTA to WIKO U Feel Lite does not work. Flashed it via TWRP and Miracle Box. What I did to make the cellular network work on wiko was format the device to make the baseband pure from wiko and rebuilt IMEI via miracle box. I got the annoying NVRAM=warning 0x10 but furtonately it did not affect wifi connectivity.
Thank you so much for your response sir : More power, I enjoyed being here in hovatek.
(23-09-2016, 06:20 PM)hovatek(23-09-2016, 01:03 PM)gefffck1 Hi sir,
After some time, I've under gone trial and error. Wiko firmware works fine but the TWRP you have ported for Cloudfone Thrill Access does not work on that FW. It does not say No OS Installed but it won't boot normally. Everytime I install TWRP my device gets bootlooped.
I think the problem is with the boot.img of wiko because when I replace it with cta's boot.img my device boots normally but a little slow compared to it's original boot.img and it's buggy when I use CTA's boot.img. I think it's because of different kernel.
So, if you may sir. Please kindly port me another TWRP? I would like it to be 3.0 : if that's not too much to ask.
Here is the boot.img and recovery.img based on WIKO U FEEL LITE FIRMWARE which I got officially from their site. https://mega.nz/#!z5IzXKzY!h4VWBTCsI-Cvo...QMw52UFBr8.
Results: I am very sure that the NVRAM of CTA to WIKO U Feel Lite does not work. Flashed it via TWRP and Miracle Box. What I did to make the cellular network work on wiko was format the device to make the baseband pure from wiko and rebuilt IMEI via miracle box. I got the annoying NVRAM=warning 0x10 but furtonately it did not affect wifi connectivity.
Thank you so much for your response sir : More power, I enjoyed being here in hovatek.
We might not be able to port the TWRP at the moment as we're busy with a number of projects
(24-09-2016, 08:39 AM)gefffck1 ...
BTW, I have been able to port TWRP 3.0 that is working for Cloudfone Thrill Access. But the thing is, I want a working TWRP on Wiko. I tried porting for wiko base firmware but I always get bootloop. Flashing/backup is fine via twrp using Wiko's firmware but when I reboot to system it gets bootlooped and also when I turn off the device and power it on, it's still the same result.