[X3non]

Requirements

• VMware (download @ http://getintopc.com/softwares/emulators...-download/ )
  
• Mavericks ISO (download @ https://docs.google.com/uc?id=0B9yHl-Szp...t=download )
  
• A Windows PC (4GB RAM with Vitualization enabled in BIOS)
  

How to install Mac OS X in Windows using VMware

1. Launch VMware program
   
   
   
   
   
2. Click on File > New Virtual Machine
   
   
   
   
   
3. In the window that appears next, Click on Custom (advanced) then click on Next
   
   
   
   
   
4. Select Workstation 12.0 in the hardware compatibility drop-down box then click on Next
   
   
   
   
   
5. Click on "Installer disc image file (ISO)" then click on Browse
   
   
   
   
   
6. Navigate to the location of the Mavericks ISO file > select it then click on Open
   
   
   
   
   
7. Click on Next
   
   
   
   
   
8. Tick the round box beside Apple Mac OS X
   Then select Mac OS X 10.7 in the drop-down box (Mavericks is actually 10.9 but this is to prevent future errors)
   
   
   
   
   
9. Click on Next
   
   
   
   
   
10. Give your virtual machine a name then Click on Next
    
    
    
    
    
11. Tick the round box beside BIOS then Click on Next
    
    
    
    
    
12. Select number of processors (should be 1 then you can increase the number of cores of processor depending on your PC's specs)
    
    
    
    
    
13. Set RAM size for the virtual machine (a minimum of 2GB is required)
    
    
    
    
    
14. Tick the round box beside "Use network address translation (NAT)" then Click on Next
    
    
    
    
    
15. Tick the round box beside "LSI Logic" then Click on Next
    
    
    
    
    
16. Tick the round box beside "SATA" then Click on Next
    
    
    
    
    
17. Tick the round box beside "Create a new virtual disk" then Click on Next
    
    
    
    
    
18. Specify the maximum disk size (should be above 15GB) then Tick the round box beside "Store virtualdisk as a single file" then Click on Next
    
    
    
    
    
19. Leave the disk file name the way it is then Click on Next
    
    
    
    
    
20. On the next window that appears, Click on Finish
    
    
    
    
    
21. Click on "Power on this virtual machine"
    
    
    
    
    
22. A black CMD prompt like screen should appear, Press Enter key to proceed
    
    
    
    
    
23. Select "Use english for the main language" then click the arrow button
    
    
    
    
    
24. Click on Continue
    
    
    
    
    
25. The license agreement screen should appear, Click on Agree
    
    
    
    
    
26. Click on Utilities > Disk Utility...
    
    
    
    
    
27. Select the disk with the partition size you created earlier on > Click on the ERASE tab
    format: should be Mac OS Extended
    Name: can be anything you like
    Then click on Erase
    
    
    
    
    
28. In the confirmation box that appears, click Erase
    
    
    
    
    
29. Once the disk has been erased successfully, Click the small red button on the top left hand corner in order to close the disk utility windows
    
    
    
    
    
30. Click on Customize
    
    
    
    
    
31. Open up "Other Optimizations" > tick the check box beside VMware-Virtual-Machine then click OK
    
    
    
    
    
32. Select the disk you erased earlier and Click on Install
    
    
    
    
    
33. Wait while Mac OS Mavericks installs
    
    
    
    
    
34. Once successful, the installation process would prompt for a restart (it would auto-restart after a 10 secs countdown)
    
    
    
    
    
35. You might get stuck on a blank grey coloured screen (If you don't then skip this step)
    
    
    
    
    
36. Simply force restart the guest OS (click on the small arrow beside the pause button then click on Restart Guest)
    
    
    
    
    
37. Wait while the Guest OS restarts (Mac OS should begin loading)
    
    
    
    
    
38. On the welcome screen, tick the check box beside Show All > scroll down and select your country from the list then click on Continue
    
    
    
    
    
39. Choose your keyboard layout (select US if you are not sure) then click continue
    
    
    
    
    
40. Choose your network connection profile then click continue
    
    
    
    
    
41. Select "Don't transfer any information now" and click continue
    
    
    
    
    
42. Click on Agree to proceed from the license agreement screen
    
    
    
    
    
43. In the confirmation box that appears, click on Agree
    
    
    
    
    
44. Fill in your name, account name and password (it's compulsory) then click continue
    
    
    
    
    
45. Wait while Mac sets up the machine
    
    
    
    
    
46. Once successful, you should now get to the Mac OS desktop screen
    
    
    
    

Important Notice

• Account creation might be skipped during installation process. If this happens, Use the details below to login into the OS
  Username: root
  Password: niresh
  

[prince1111]

The link is not working again sir please check

[prince1111]

Download link has curupt pks fix admin

[hovatek]

Download link has curupt pks fix admin

Check https://www.hovatek.com/forum/thread-45603.html