bricked zopo zp980 6589T 2GB/32GB
bricked zopo zp980 6589T 2GB/32GB
(07-06-2016, 01:04 AM)bigtoy44 Got this phone used not working. Tried to flash firmware with SPFT.It never goes past the red bar at 100%. Error 4001 If I plug it into the computer while holding the volume down button it just shows up as MTK usb port (com 21). Installed MediaTek preloader drivers. they show up as MediaTek preloader usb Vcom port (21). I would greatly appreciate and help. Thank you.
(07-06-2016, 02:09 PM)matybazz(07-06-2016, 01:04 AM)bigtoy44 Got this phone used not working. Tried to flash firmware with SPFT.It never goes past the red bar at 100%. Error 4001 If I plug it into the computer while holding the volume down button it just shows up as MTK usb port (com 21). Installed MediaTek preloader drivers. they show up as MediaTek preloader usb Vcom port (21). I would greatly appreciate and help. Thank you.
Try a differ usb or port also use a higher version of spflashtool https://www.hovatek.com/forum/thread-159.html
(07-06-2016, 04:50 PM)bigtoy44 I have tried different usb ports,cables,computers and versions of sp flash tool. Same result.Open to any ideas.
(07-06-2016, 06:44 PM)matybazz(07-06-2016, 04:50 PM)bigtoy44 I have tried different usb ports,cables,computers and versions of sp flash tool. Same result.Open to any ideas.
* Run SP flash tool as Admin
* Ensure to install the correct drivers (see https://www.hovatek.com/forum/thread-440.html )
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing
(08-06-2016, 12:13 AM)bigtoy44 screenshot
(08-06-2016, 10:19 AM)matybazz(08-06-2016, 12:13 AM)bigtoy44 screenshot
Then theres something wrong with the device.. Have your usb port checked on your phone
(11-09-2016, 01:21 AM)bigtoy44 replaced the usb port with a new one. the phone is still recognized as Mediatek usb port, when holding volume up and down and plugging in the usb cable.