[Please help] Infinix Zero x506 Dead + Flash tool error 4001
[Please help] Infinix Zero x506 Dead + Flash tool error 4001
(22-02-2016, 12:35 PM)ceta60rr@yahoo.com Dears
issue summary: x506 16GB, dead , Sp Flash tool only show red bar 100% then error 4001 >
my issue started as follow:
1- Mobile not responsive to touch.
2- Mobile don't walk from standby pressing power button.
3- I forced shutdown (Long Power Press) then powered on again.
4- issues 1,2 were repeated.
5- i downloaded SP Flashtool 5 ,and stock ROM Kitkat j608.
6- Loaded scatter file, unselected all except bootimg+recovery
7-clicked download
8-Connected phone while clicking on volume +
9- in SP Tools redbar shown to 100%,then error S_FT_DA_NO_Response4001
then it was dead,
whenever i try to flash , it gives same error S_FT_DA_NO_Response4001.
Any help .
Notes:
Battery is non removable.
i tried flash tool version 3.1344.0: Gives same error
i tried win 8, win7 64 bit, same error on both.
(22-02-2016, 03:46 PM)hovatek You're not supposed to hold any button when connecting to PC for flashing. See https://www.hovatek.com/forum/thread-159.htmlsorry for late update,
(29-02-2016, 09:07 AM)ceta60rr@yahoo.com I followed the exact steps (Including the SD Card inserted)
after i click download. then connect the usb cord,
windows 7 x64 detects the Device as MTK USB Port.
regardless of the manually installed driver "MediaTek USB Preloader Port"
photo attached
Please advise,
Note: Sp tools Detects the device and stops it from disconnected as it normally does fluctuate connecting ,,,disconnecting . till 1 min passes then the SP tool error 4001 pops up. and mobile mobile disconnects at the same time
(02-03-2016, 12:59 PM)ceta60rr@yahoo.com I have tested other 2 different cables.
also tested on 3 different machines. 2 windows 7 + 1 Windows8.1
still the same behavior and error.