alcatel 9009b boot loop after flashing patched magisk file
alcatel 9009b boot loop after flashing patched magisk file
(11-11-2021, 04:42 PM)hovateki dont have a username and password for this program,can you help me with that please(10-11-2021, 01:27 PM)kronos ok this is the scenario,the tablet boot loops, the message says boot in 5 sec but then the tablet switch off and on again and display the same thing.i used python and the bypass utility and i am getting a error payload not found,at the same time i am connected via mediatek usb via the libz driver.
i need to find a way for this tablet to bypass da then i can use spflashtool to flash the stock boot img.Is there no other software that will work .
please note a in the previous threads i cant enter fastboot or recovery as the button combo dont work anymore.
i was thinking of charging the battery direct then cut the battery wire and rejoin it and try button combo for fast boot,also my bootloader is unlocked fully.
Ok i tried mct , try asbun, always the same error
I just checked the supported chipsets and MT8321 isn't on the list. That explains the error.
You might be unable to access fastboot due to the orange state.
Try flashing using sugar mtk or try other models DA @ https://www.hovatek.com/forum/thread-23775.html
