Hovatek Forum MOBILE Android [Please help] Huawei Y520-U22 remains at backup page even after hard reset and flashing
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Huawei Y520-U22 remains at backup page even after hard reset and flashing

[Please help] Huawei Y520-U22 remains at backup page even after hard reset and flashing

james bwalya
james bwalya
james bwalya
Respected Member
112
18-06-2020, 09:19 PM
#1



The problem started when I tried to remove pattern through hard reset. The process was done but after rebooting the phone only to find it stuck on a page giving three options as seen on the image attached.
 I tried hard reseting it several times but it still remains the same 
Tried to flash with SP flash tool two different flash files Y520-U22V100R001C328B111 andY520-U22V100R001C328B107.The flashing was successful but nothing changed.I tried format all +download, firmware upgrade and download only.
Tried flashing with miracle box but i was geting error 0000.The process was only completing after unticking cache.But still nothing changed.
Tried flashing with SDcard method but the installation upgrade wasn't finishing.I was getting  something like"installation aborted "
My phone is Huawei Y520-U22V100R001C644B101.
Please help me
This post was last modified: 18-06-2020, 09:49 PM by james bwalya.
X3non
X3non
X3non
Recognized Contributor
22,062
19-06-2020, 09:21 AM
#2
(18-06-2020, 09:19 PM)james bwalya The problem started when I tried to remove pattern through hard reset. The process was done but after rebooting the phone only to find it stuck on a page giving three options as seen on the image attached.
 I tried hard reseting it several times but it still remains the same 
Tried to flash with SP flash tool two different flash files Y520-U22V100R001C328B111 andY520-U22V100R001C328B107.The flashing was successful but nothing changed.I tried format all +download, firmware upgrade and download only.
Tried flashing with miracle box but i was geting error 0000.The process was only completing after unticking cache.But still nothing changed.
Tried flashing with SDcard method but the installation upgrade wasn't finishing.I was getting  something like"installation aborted "
My phone is Huawei Y520-U22V100R001C644B101.
Please help me

there's no screenshot attached, upload your image(s) to imgur.com then post the link here
when you flash / reset the phone, does it go through initial setup process?
james bwalya
james bwalya
james bwalya
Respected Member
112
19-06-2020, 09:45 AM
#3
(19-06-2020, 09:21 AM)X3non there's no screenshot attached, upload your image(s) to imgur.com then post the link here
when you flash / reset the phone, does it go through initial setup process?
https://imgur.com/a/Zg1h3S7

No it doesn't go through initial setup process.Just after rebooting it goes straight to this ☝page.
maxxxiii
maxxxiii
maxxxiii
Senior Member
379
20-06-2020, 09:34 AM
#4
(19-06-2020, 09:45 AM)james bwalya No it doesn't go through initial setup process.Just after rebooting it goes straight to this ☝page.

What happens when you select Do nothing and reboot?
james bwalya
james bwalya
james bwalya
Respected Member
112
20-06-2020, 10:54 AM
#5



(20-06-2020, 09:34 AM)maxxxiii
(19-06-2020, 09:45 AM)james bwalya No it doesn't go through initial setup process.Just after rebooting it goes straight to this ☝page.

What happens when you select Do nothing and reboot?
The phone just power off and when you power it on,its the same page that displays.
X3non
X3non
X3non
Recognized Contributor
22,062
20-06-2020, 03:38 PM
#6
(20-06-2020, 10:54 AM)james bwalya The phone just power off and when you power it on,its the same page that displays.

sounds like the emmc chip is faulty
use sp flash tool to format all except bootloader (don't flash the firmware, just format only) then confirm if the device is still able to power on or dead (vibrate only when you attempt to power it on)
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram