Hovatek Forum
[Please help] samsung a405fn frp bypass with combination - Printable Version

+- Hovatek Forum (https://www.hovatek.com/forum)
+-- Forum: MOBILE PHONES HELP SECTION (https://www.hovatek.com/forum/forum-75.html)
+--- Forum: Android (https://www.hovatek.com/forum/forum-76.html)
+--- Thread: [Please help] samsung a405fn frp bypass with combination (/thread-38344.html)

Pages: 1 2


samsung a405fn frp bypass with combination - disturbed - 10-03-2021

file. i just dont want to spend hours watching YT videos without success.

thanks


RE: Can i use some file from site Halabtech for FRP bypass sam a40 ? - X3non - 11-03-2021

(10-03-2021, 02:02 PM)disturbed Wrote:  ...

only one who has used the same files can answer this, if not then you'll just have to try it out yourself to find out if it works or not


RE: Can i use some file from site Halabtech for FRP bypass sam a40 ? - disturbed - 11-03-2021

i just have paid for that site before time because i needed something available there.

Now i am downloading what i need i think.

can i use the 3 which are shown ?!

https://ibb.co/kg1jKLQ


RE: Can i use some file from site Halabtech for FRP bypass sam a40 ? - X3non - 12-03-2021

(11-03-2021, 12:44 PM)disturbed Wrote:  i just have paid for that site before time because i needed something available there.

Now i am downloading what i need i think.

can i use the 3 which are shown ?!

https://ibb.co/kg1jKLQ

strange because you might be able to find combination firmware even on free firmware sharing websites
all 3 are U3, i'll say start with the first one i.e ***ATD1***


RE: Can i use some file from site Halabtech for FRP bypass sam a40 ? - disturbed - 12-03-2021

before flash i dont see repartition enabled but

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 2447 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


RE: Can i use some file from site Halabtech for FRP bypass sam a40 ? - X3non - 13-03-2021

(12-03-2021, 03:25 PM)disturbed Wrote:  before flash i dont see repartition enabled but
...

what's your full device model? sm-a405* , check recovery mode
what options do you have enabled under odin > options?
do you get the same error on all 3 firmwares?


RE: samsung a405fn frp bypass with combination - disturbed - 13-03-2021

a405fn

https://ibb.co/r5zTNFs - the default ones

will try all the files but can`t we orientate which correct file to use? if every time lose time to download 3 big files...

thanks Tongue


RE: samsung a405fn frp bypass with combination - X3non - 15-03-2021

(13-03-2021, 11:24 AM)disturbed Wrote:  a405fn

https://ibb.co/r5zTNFs - the default ones

will try all the files but can`t we orientate which correct file to use? if every time lose time to download 3 big files...

thanks Tongue

the error indicates wrong firmware for the device model / region
if you don't wish to download heavy files then you should try bypass methods for this same model / binary version that you can find on youtube


RE: samsung a405fn frp bypass with combination - disturbed - 22-03-2021

mine is fn/ds. can i apply files for only fn ?


RE: samsung a405fn frp bypass with combination - X3non - 23-03-2021

(22-03-2021, 01:46 PM)disturbed Wrote:  mine is fn/ds. can i apply files for only fn ?

fn/ds is the same as fn