[Please help] ZH&K PAC25 MT6571
[Please help] ZH&K PAC25 MT6571
(08-11-2016, 01:10 PM)Menard_Castaneda I want to know where can locate the testpoint cause this device cant be detected on my pc after i use SP Flashtool with All Format + Download.Now my phone totally deadboot and cant be recharge the battery.Please Help thanks in advance
(08-11-2016, 02:36 PM)hovatek(08-11-2016, 01:10 PM)Menard_Castaneda I want to know where can locate the testpoint cause this device cant be detected on my pc after i use SP Flashtool with All Format + Download.Now my phone totally deadboot and cant be recharge the battery.Please Help thanks in advance
I dont think you need that yet.
1. Was formatting successful or it got interrupted ?
2. Did download write the files in the firmware to 100% and OK
3. Do you have the full firmware for this exact model and have you tried re flashing it?
This is the result of memory test of my phone to configure what really causing problem in flashing..
Quote:============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x10000000 (256MB/2048Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x0000000070000000(1792MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test:
Writing...
OK!!
the formatting and flashing was successful but im not quiet sure if my files firmware are really genuine and not been tampered by the uploader in 4shared.com cause the result is, my phone was brick.
(09-11-2016, 12:14 AM)Menard_Castaneda
This is the result of memory test of my phone to configure what really causing problem in flashing..
(09-11-2016, 01:24 PM)hovatek(09-11-2016, 12:14 AM)Menard_Castaneda
This is the result of memory test of my phone to configure what really causing problem in flashing..
We need to be sure its totally dead.
Does your PC make a sound when you connect the phone?
(10-11-2016, 04:06 AM)Menard_Castaneda yes it have a sound and i can use to flash it 100% but it come goes to nothing even successful flashing at too many times my phone wont boot and recharge battery anymore after that. Ill attach a screenshot of my usb driver,this a new install driver after my phone was dead only the mtk usb port has been left, then usb vcom preloader driver has not responding anymore cause of wrong flashing or formatting using the sp tools.I think the mt65xx is corrupted in my phone it wont show in device manager after reinstalling a new driver i cant install the usb vcom preloader driver without showing that in device manager.
(10-11-2016, 12:04 PM)Menard_Castaneda i had to do that before i download a differrent firmware to replace the old one that i download but still no luck to succeed to revive my phone.Can you recommend me sir a legit firmware for my device i so tired for searching a firmware from it, the official site of my phone is down or been retired too so its hard to find the suit firmware for my phone..