Hovatek Forum MOBILE Android TECNO P5S & M3S
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


TECNO P5S & M3S

TECNO P5S & M3S

Pages (2): 1 2 Next
mtenget
mtenget
mtenget
Techie Member
77
17-08-2016, 09:30 PM
#1



Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek
apara
apara
apara
Senior Member
205
18-08-2016, 06:48 AM
#2
(17-08-2016, 09:30 PM)mtenget Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek

Is it giving you an error message or the phone is not detected by the system?
ALBA
ALBA
ALBA
Senior Member
550
18-08-2016, 08:19 AM
#3
(18-08-2016, 06:48 AM)apara
(17-08-2016, 09:30 PM)mtenget Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek

Is it giving you an error message or the phone is not detected by the system?

Please did u do anything like installing vcom drivers on ur pc ? ... if no the follow the link here to install drivers

https://www.hovatek.com/forum/thread-440.html
matybazz
matybazz
matybazz
Senior Member
2,289
18-08-2016, 11:04 AM
#4
(17-08-2016, 09:30 PM)mtenget Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek
See here https://www.hovatek.com/forum/thread-159.html
Pline
Pline
Pline
Respected Member
102
18-08-2016, 12:52 PM
#5



its wild goose chase bro, iv tried it like a thousand times but carlcare usually does it am not sure if there's a specific procedure or flash files i guess.i even tried taking a rom dump no success ...so to my conclusion it must be something to do with bootloader file
Pline
Pline
Pline
Respected Member
102
18-08-2016, 12:54 PM
#6
(18-08-2016, 06:48 AM)apara
(17-08-2016, 09:30 PM)mtenget Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek

Is it giving you an error message or the phone is not detected by the system?
when u try flashing with flashtool it usually connect and disconnect immediately giving error 2004,
matybazz
matybazz
matybazz
Senior Member
2,289
18-08-2016, 04:20 PM
#7
(18-08-2016, 12:54 PM)Pline when u try flashing with flashtool it usually connect and disconnect immediately giving error 2004,

There was an interruption in the communication between SP flash tool and the device refer to https://www.hovatek.com/forum/thread-439.html
mtenget
mtenget
mtenget
Techie Member
77
18-08-2016, 08:50 PM
#8
(18-08-2016, 06:48 AM)apara
(17-08-2016, 09:30 PM)mtenget Hi.....i've a problem while flashing Tecno P5S and M3S, it seems like a driver here because the problem persists even when i try to read rom from working phone.
As i know this phone is Mediatek MT6572 Chip but i heard something different about the chip of this phones..!! Is there any one here who experienced more about this phone?? Or what is the coerect driver for this phone. ...

Otherwise, good work Hovatek

Is it giving you an error message or the phone is not detected by the system?

Detected but ending with error of communication then immedietelly disconnected
Pline
Pline
Pline
Respected Member
102
19-08-2016, 08:02 AM
#9
(18-08-2016, 04:20 PM)matybazz
(18-08-2016, 12:54 PM)Pline when u try flashing with flashtool it usually connect and disconnect immediately giving error 2004,

There was an interruption in the communication between SP flash tool and the device refer to https://www.hovatek.com/forum/thread-439.html

Not exactly a communication problem coz they all behave the same P5S &M3S i even tried on a brand new Tecno M3S .It disconnects immediately after showing the red line on flashtool
matybazz
matybazz
matybazz
Senior Member
2,289
19-08-2016, 10:11 AM
#10



(18-08-2016, 08:50 PM)mtenget Detected but ending with error of communication then immedietelly disconnected

Take out battery and boost manually also try a different usb amd pc port
Or if posible a different pc
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram