TECNO M7 GOT BRICKED
TECNO M7 GOT BRICKED
(20-02-2016, 03:23 PM)wiseniggy HI,
my tecno m7 with mtk6572 got into encyption unsucessful mode
and actually displayed a message to reset the phone. when the resetting process was done, i got a mount error while resetting. so i tried all solutions by this forum to remove that error but it wasnt ok. i had to to flash it with the stock rom of almost three types, even on different systems but i always get a BROM ERROR: ?? 8 each time. i tried formatting using sp flashtool before flashing and it did but cant flash other files except the preloader.bin file.
Now it cant format or detect the Bootloader DA again but i getting sound from the system and another error after some minutes which says : S_BROM_CMD_STARTCMD_FAIL (2005)
PLEASE HELP.
(20-02-2016, 10:56 PM)wiseniggy PLEASE i have gone through all the error codes in the thread above and tried the steps but it still unsuccessful.i still cant get to the bootloader DA during flash process.
Please i really need help.
(21-02-2016, 03:28 PM)hovatek(20-02-2016, 10:56 PM)wiseniggy PLEASE i have gone through all the error codes in the thread above and tried the steps but it still unsuccessful.i still cant get to the bootloader DA during flash process.
Please i really need help.
Can the phone still enter recovery and factory modes?
(21-02-2016, 09:22 PM)wiseniggy i cant get into recovery or factory mode, and i cant flash the recoery image either by using sp flash tool.
i get a BROM ERROR ?? 8 CODE
(22-02-2016, 12:21 AM)Usaku2003 same issue i have.....i hv done all i can
(22-02-2016, 03:06 PM)hovatek(21-02-2016, 09:22 PM)wiseniggy i cant get into recovery or factory mode, and i cant flash the recoery image either by using sp flash tool.
i get a BROM ERROR ?? 8 CODE
1. Where did you download the stock ROM from?
2. Try Infinix flash tool @ https://www.hovatek.com/forum/thread-9224.html