Hovatek Forum MOBILE Android [Tutorial] How to use AIO Flasher
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to use AIO Flasher

[Tutorial] How to use AIO Flasher

Pages (2): 1 2 Next
hovatek
hovatek
hovatek
Administrator
49,570
06-08-2014, 06:30 PM
#1



AIO Flasher is another useful tool for unbricking / fixing bricked Mediatek (MTK) Android devices (e.g Tecno, Micromaz, Gionee, Infinix, Opsson etc).

Requirements


How to use AIO Flasher


Follow the steps below to flash firmware files using AIO flasher

  1. . Launch adb terminal
  2. Boot the phone into either factory mode (volume decrease + power button) or boot mode
  3. Connect the phone to PC
  4. In adb terminal, type adb devices then press enter
  5. Type adb reboot bootloader then press enter
  6. The phone should boot into fastboot mode
  7. Launch AIO Flasher
  8. At the upper left corner, tick the type of file you wish to flash to the phone
  9. Click Select file
  10. In the window that pops up, navigate to the location of the file and select it
  11. Tick Erase (optional )
  12. Click Flash
  13. When flashing is complete, select Normally in the Reboot Menu then click Reboot

Important Notice
  • This tool is old and might not work on newer devices without some kind of modification
  • AIO flasher uses fastboot so your device's bootloader needs to be unlocked
  • If fastboot is unable to detect your device then you might be using an old version and need to use the latest version
This post was last modified: 29-05-2018, 01:27 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
giftium
giftium
giftium
Techie Member
54
18-03-2015, 02:53 PM
#2
please how do I launch adb terminal in MTK droid tools? thanks
hovatek
hovatek
hovatek
Administrator
49,570
18-03-2015, 06:17 PM
#3
(18-03-2015, 02:53 PM)giftium please how do I launch adb terminal in MTK droid tools? thanks

once you launch MTK droid tools, just click adb terminal at the bottom. a command prompt window should pop up. you're good to go

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
giftium
giftium
giftium
Techie Member
54
18-03-2015, 10:56 PM
#4
Kk, thanks
Olugbenga
Olugbenga
Olugbenga
Newbie
1
16-07-2015, 03:15 AM
#5



didnt work
hovatek
hovatek
hovatek
Administrator
49,570
16-07-2015, 11:03 AM
#6
(16-07-2015, 03:15 AM)Olugbenga didnt work

what error did you get?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Rooy57
Rooy57
Rooy57
Newbie
1
20-09-2015, 06:18 AM
#7
Please I need tecno L7 stock rom
Am unable to receive calls, whenever there's an incoming calls, it says "unfortunately dialer has stopped" please help
hovatek
hovatek
hovatek
Administrator
49,570
20-09-2015, 12:32 PM
#8
(20-09-2015, 06:18 AM)Rooy57 Please I need tecno L7 stock rom
Am unable to receive calls,  whenever there's an incoming calls,  it says "unfortunately dialer has stopped"  please  help

create a new thread so we focus on this

see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Billionsam
Billionsam
Billionsam
Enthusiastic Member
7
13-02-2016, 12:15 PM
#9
How do i do it, my phone is Dead, doesn't enter any mode(Download or Recovery)
matybazz
matybazz
matybazz
Senior Member
2,289
13-02-2016, 12:22 PM
#10



(13-02-2016, 12:15 PM)Billionsam How do i do it, my phone is Dead, doesn't enter any mode(Download or Recovery)

create a new thread so we focus on this

see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram