tecno pop 2 plus dead after flash with swd.
tecno pop 2 plus dead after flash with swd.
(06-07-2021, 11:07 PM)KAVETEEVANS i did manage to bypass brom successfully, when i reached to flashing ,my sp tool which i tried sever different versions if the tool and also firmware, it kept bring error 4032, i tried reading back,memory test, everything that might have , i also tried flashing it without battery but because its still has to be connected so as to bypass brom, the port is unstable , it keeps making the connection and disconnect sound , tudus and i also tried with the battery in still refused ..now the question is,can i use the B2 firmware istead of BA2 to see if it may proceed and stop the error? or what exactly is the solution, its a hard bricked phone
(12-06-2021, 12:18 PM)X3nonyes thats what works, remove the batery though its inbuilt, format all and download(11-06-2021, 03:47 PM)KAVETEEVANS thank you for your reply. i have used that option format + download and its still not working. kindly note that im using SWD....
disconnect / reconnect the battery (if the battery of the device is inbuilt then you'll need to disassemble the device to get to the battery) then retry flashing using SWD format all + download
(07-12-2021, 03:30 PM)kelvinchinedu So sir before u modify anything On the phone look for advice here if u feel u are not 100% sure because the work here is to help