Hovatek Forum MOBILE Android boot loop tecno spark5
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


boot loop tecno spark5

boot loop tecno spark5

Roadblock7904
Roadblock7904
Roadblock7904
Newbie
4
18-09-2021, 09:02 PM
#1



my tecno spark 5 is in boot loop after trying to root tried to fix but cant remember the firmware version tried a lot of methods but in swd i get status sec img type mismatch i generated checksum but still doesn't work plss help its been a week
X3non
X3non
X3non
Recognized Contributor
22,062
20-09-2021, 11:16 AM
#2
(18-09-2021, 09:02 PM)Roadblock7904 my tecno spark 5 is in boot loop after trying to root tried to fix but cant remember the firmware version tried a lot of methods but in swd i get status sec img type mismatch i generated checksum but still doesn't work plss help its been a week

backup recovery.img from your device then use method 7 @ https://www.hovatek.com/forum/thread-16005.html
for spft errors, see https://www.hovatek.com/forum/thread-439.html
Roadblock7904
Roadblock7904
Roadblock7904
Newbie
4
20-09-2021, 07:11 PM
#3
(20-09-2021, 11:16 AM)X3non
(18-09-2021, 09:02 PM)Roadblock7904 my tecno spark 5 is in boot loop after trying to root tried to fix but cant remember the firmware version tried a lot of methods but in swd i get status sec img type mismatch i generated checksum but still doesn't work plss help its been a week

backup recovery.img from your device then use method 7 @ https://www.hovatek.com/forum/thread-16005.html
for spft errors, see https://www.hovatek.com/forum/thread-439.html

I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares
X3non
X3non
X3non
Recognized Contributor
22,062
21-09-2021, 11:03 AM
#4
(20-09-2021, 07:11 PM)Roadblock7904 I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares

i recommend using method 7 but you'd need to backup recovery.img from your device, power off your device then make a readback of recovery.img
scatter file for kd7h @ https://www.hovatek.com/forum/thread-34535.html (you need this to get the values for recovery partition)
mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
readback guide @ https://www.hovatek.com/forum/thread-526.html (skip steps 1-4)
Roadblock7904
Roadblock7904
Roadblock7904
Newbie
4
21-09-2021, 11:29 AM
#5



(21-09-2021, 11:03 AM)X3non
(20-09-2021, 07:11 PM)Roadblock7904 I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares

i recommend using method 7 but you'd need to backup recovery.img from your device, power off your device then make a readback of recovery.img
scatter file for kd7h @ https://www.hovatek.com/forum/thread-34535.html (you need this to get the values for recovery partition)
mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
readback guide @ https://www.hovatek.com/forum/thread-526.html (skip steps 1-4)

method 7 will not work because I already formated and replaced it with another firmware and this fast boot happened because I flashed the wrong boot.img with adb that I downloaded from your website
Roadblock7904
Roadblock7904
Roadblock7904
Newbie
4
21-09-2021, 11:55 AM
#6
(21-09-2021, 11:29 AM)Roadblock7904
(21-09-2021, 11:03 AM)X3non [quote="Roadblock7904" pid='219135' dateline='1632161494']
I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares

i recommend using method 7 but you'd need to backup recovery.img from your device, power off your device then make a readback of recovery.img
scatter file for kd7h @ https://www.hovatek.com/forum/thread-34535.html (you need this to get the values for recovery partition)
mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
readback guide @ https://www.hovatek.com/forum/thread-526.html (skip steps 1-4)

i also get this error when trying to run main.py of how to flash an mtk secure boot device without da: https://ibb.co/cQZ3rt3
X3non
X3non
X3non
Recognized Contributor
22,062
22-09-2021, 11:49 AM
#7
(21-09-2021, 11:55 AM)Roadblock7904 method 7 will not work because I already formated and replaced it with another firmware and this fast boot happened because I flashed the wrong boot.img with adb that I downloaded from your website

that's unfortunate for you, because if you truly formatted then there's no getting the build number now unless it's printed on the pcb (which i doubt)
BTW you should see https://www.hovatek.com/forum/thread-39260.html


(21-09-2021, 11:55 AM)Roadblock7904 i also get this error when trying to run main.py of how to flash an mtk secure boot device without da: https://ibb.co/cQZ3rt3

please read the very important notice at the top of the mtk bypass guide, the point that states not to install libusb but rather usbdk if you're using latest version of mtk bypass
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram