[Please help] mate30 chinese phone TWRP
[Please help] mate30 chinese phone TWRP
(19-08-2021, 10:48 AM)Spada Hello
I have a Chinese phone with these specifications:
Model: Mate30
Build: TCKJ__H33_E125P_1_ZX_DS_ZPX 20191129.163736
Android Version: 10
CPU: MT6799
8GB
256GB
Baseband: MOLY.WR8.w1449.MD.WG.MP.V6.P2, 2019/03/29 13:36
Can someone please compile a TWRP for this phone?
Thanks.
(20-08-2021, 01:18 PM)hovatek(19-08-2021, 10:48 AM)Spada Hello
I have a Chinese phone with these specifications:
Model: Mate30
Build: TCKJ__H33_E125P_1_ZX_DS_ZPX 20191129.163736
Android Version: 10
CPU: MT6799
8GB
256GB
Baseband: MOLY.WR8.w1449.MD.WG.MP.V6.P2, 2019/03/29 13:36
Can someone please compile a TWRP for this phone?
Thanks.
Keep an eye on https://www.hovatek.com/forum/thread-21839.html or our blog for an update with TWRP v3.5 support
(20-08-2021, 05:37 PM)Spada OK
I was trying with TWRP to other modelsĀ and now it only boots to Fastboot.
What can I do for It to boot again?
I can't find an image for this model.
I can't find this model also!
Thank you very much
(24-08-2021, 06:42 AM)hovatek(20-08-2021, 05:37 PM)Spada OK
I was trying with TWRP to other modelsĀ and now it only boots to Fastboot.
What can I do for It to boot again?
I can't find an image for this model.
I can't find this model also!
Thank you very much
Try disable dm verity using method 3 @ https://www.hovatek.com/forum/thread-32719.html
(29-08-2021, 05:32 PM)Spada Method 3 returns:
Rewriting vbmeta struct at offset: 0
Sending 'vbmeta' (0 KB) OKAY [ 0.015s]
Writing 'vbmeta' FAILED (remote: 'partition table doesn't exist')
fastboot: error: Command failed
(Before I've - fastboot oem unlock)
What can I do now?
(30-08-2021, 11:46 AM)X3non(29-08-2021, 05:32 PM)Spada Method 3 returns:
Rewriting vbmeta struct at offset: 0
Sending 'vbmeta' (0 KB) OKAY [ 0.015s]
Writing 'vbmeta' FAILED (remote: 'partition table doesn't exist')
fastboot: error: Command failed
(Before I've - fastboot oem unlock)
What can I do now?
Sounds like you have a clone device but first make a firmware backup of the device in it's current state using the guild at https://www.hovatek.com/forum/thread-21970.html
(07-09-2021, 08:49 PM)Spada I got stuck in the flash tool.
I get;
Not Support platform: MT6799
[HINT]:
Please select a valid load or ask for help!
I've tried the versions:
5.1952, 5.2044, v5.2036, 5.1436
(the newest two versions say to use flashtool v5.2048.00 or older to handle old platform MT6799)
Tried several USB cables and USB ports...
Administrator mode, Windows XP SP3 compatibility...
What can I do next?
Thanks very much. You guys are great!
(08-09-2021, 10:43 AM)X3non(07-09-2021, 08:49 PM)Spada I got stuck in the flash tool.
I get;
Not Support platform: MT6799
[HINT]:
Please select a valid load or ask for help!
I've tried the versions:
5.1952, 5.2044, v5.2036, 5.1436
(the newest two versions say to use flashtool v5.2048.00 or older to handle old platform MT6799)
Tried several USB cables and USB ports...
Administrator mode, Windows XP SP3 compatibility...
What can I do next?
Thanks very much. You guys are great!
Boundary Check failed error?
try the fixes listed for "boundary check failed" @ https://www.hovatek.com/forum/thread-439.html
(08-09-2021, 06:50 PM)Spada ...
Should I continue doing everything with the platform 6580 despite the phone info says "CPU - MT6799" in "Android - About Phone"?
Thanks.