[Please help] SP Flash error on mt6739
[Please help] SP Flash error on mt6739
(11-08-2021, 11:04 AM)crodriguez005 I got my hands on a wiko life 2 from assurance wireless and wanted to take a crack at rooting it. So i played around with the phone and flashed a wrong recovery and now its stuck on a bootloop. So i got a stock rom and am trying to flash it using SP tools by and i keep getting and error "Status da hash mismatch". Then i tried following this guide https://www.hovatek.com/forum/thread-37957.html and I end up getting the same error. On step 11, it says I should see "Protection disabled" after typing command "python main.py" and I dont get that. Ill post a screen shot of it. Anyone have an idea as to what steps Im skipping?
(11-08-2021, 09:12 PM)hovatek(11-08-2021, 11:04 AM)crodriguez005 I got my hands on a wiko life 2 from assurance wireless and wanted to take a crack at rooting it. So i played around with the phone and flashed a wrong recovery and now its stuck on a bootloop. So i got a stock rom and am trying to flash it using SP tools by and i keep getting and error "Status da hash mismatch". Then i tried following this guide https://www.hovatek.com/forum/thread-37957.html and I end up getting the same error. On step 11, it says I should see "Protection disabled" after typing command "python main.py" and I dont get that. Ill post a screen shot of it. Anyone have an idea as to what steps Im skipping?
1. How did you flash recovery? fastboot I guess
2. Your log doesn't look right. Remove all filters then re-add then retry
(12-08-2021, 09:49 AM)crodriguez005 I flashed it in fastboot.
I removed all the filters and readded it and its giving me the same log. The thing that i noticed is that the computer connects the phone, disconnects, reconnects and disconnect it all within 5 seconds. I have the vcom drivers installed and had no issues with it as i was able to flash it with fastboot. But it seems to me that the computer doesnt stay connected with the phone and causing the da hash mismatch in sp tools. Do you have another suggestion? I tried in another computer also.