Meizu M5C bricked after a wipe with SP flash tool
Meizu M5C bricked after a wipe with SP flash tool
(17-04-2021, 11:55 PM)kayuz6 Good evening,try another version of sp flash tool
Some days ago I formatted my meizu m5c with the auto format feature on Sp flash tool excluding the boot loader, you will ask why... well that's another story
Anyway, I tried to flash with a rom found on Needrom and it said secure base band can't flash.
I followed your excellent guide here on how to elude security on protected MTK and finally I can flash on the phone, but!
This error came out:
"scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NONE"
So I learned that I can format the internal storage of the phone to correct type with Sp Flashtool version v.3.x but when I load the scatter I get an error saying:
"Check your scatter name if is legal..."
Something like that!
It refuse to open it!
What I can do? I need that poor meizu, I have to look at different rom?
Thanks
Grazie raga
(18-04-2021, 02:29 PM)Abdulakeem14(17-04-2021, 11:55 PM)kayuz6 Good evening,try another version of sp flash tool
Some days ago I formatted my meizu m5c with the auto format feature on Sp flash tool excluding the boot loader, you will ask why... well that's another story
Anyway, I tried to flash with a rom found on Needrom and it said secure base band can't flash.
I followed your excellent guide here on how to elude security on protected MTK and finally I can flash on the phone, but!
This error came out:
"scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NONE"
So I learned that I can format the internal storage of the phone to correct type with Sp Flashtool version v.3.x but when I load the scatter I get an error saying:
"Check your scatter name if is legal..."
Something like that!
It refuse to open it!
What I can do? I need that poor meizu, I have to look at different rom?
Thanks
Grazie raga
(18-04-2021, 05:26 PM)kayuz6 Update!!!disconnect and reconnect the battery
I successfully flashed the phone using the scatter from a good (I suppose so!) rom found on Needrom. I used SP FlashTool 3.
It took circa 35minutes using UART connection 926000 and it correctly finished using Download mode.
But still the phone can't turn on!!!
What I have to do?
(18-04-2021, 05:26 PM)kayuz6 Update!!!
I successfully flashed the phone using the scatter from a good (I suppose so!) rom found on Needrom. I used SP FlashTool 3.
It took circa 35minutes using UART connection 926000 and it correctly finished using Download mode.
But still the phone can't turn on!!!
What I have to do?
(19-04-2021, 09:44 AM)X3non(18-04-2021, 05:26 PM)kayuz6 Update!!!
I successfully flashed the phone using the scatter from a good (I suppose so!) rom found on Needrom. I used SP FlashTool 3.
It took circa 35minutes using UART connection 926000 and it correctly finished using Download mode.
But still the phone can't turn on!!!
What I have to do?
do as @Abdulakeem14 has suggested, it'll help tell if the device is stuck in flash mode or if the firmware you flashed is incompatible