Huavey Mate 30 - clone china
Huavey Mate 30 - clone china
(16-04-2021, 10:23 AM)xadimx Hi, anybody can help me?
I wanna flash itel Mate 30 but I get the error S_FT_ENABLE_FAIL (4032).
I tried to flash it with different firmwares I found on differents sites and I still get the same error.
Can anyboday helps me please?
Format end firmware ALPS.L1.MP6.v2_YUANDA6580.WE.L
(17-04-2021, 10:40 AM)X3nonTotally dead, View only USB from computer (Win10), Visible with the FlashTool program.(16-04-2021, 10:23 AM)xadimx Hi, anybody can help me?
I wanna flash itel Mate 30 but I get the error S_FT_ENABLE_FAIL (4032).
I tried to flash it with different firmwares I found on differents sites and I still get the same error.
Can anyboday helps me please?
Format end firmware ALPS.L1.MP6.v2_YUANDA6580.WE.L
what's the current state of this phone? totally dead or stuck at boot?
(18-04-2021, 08:09 AM)xadimx Totally dead, View only USB from computer (Win10), Visible with the FlashTool program.
(19-04-2021, 09:03 AM)X3non(18-04-2021, 08:09 AM)xadimx Totally dead, View only USB from computer (Win10), Visible with the FlashTool program.
have you tried the fixes for error 4032 @ https://www.hovatek.com/forum/thread-439.html ?
how exactly did the phone go dead? did you flash a firmware that caused this or something else?
have you tried disconnecting / reconnecting the battery of the device and it's still dead?
are you able to readback from the device?
(19-04-2021, 01:06 PM)xadimx I tried with a firmware with formatting that "worked", but at startup it does nothing (absolutely nothing on the screen), ....
(19-04-2021, 01:06 PM)xadimx ... I think I need something (firmware) dedicated to the phone
(20-04-2021, 09:46 AM)X3non(19-04-2021, 01:06 PM)xadimx I tried with a firmware with formatting that "worked", but at startup it does nothing (absolutely nothing on the screen), ....
you'll need to explain what you mean by this
(19-04-2021, 01:06 PM)xadimx ... I think I need something (firmware) dedicated to the phone
you can disassemble the phone then look around the pcb for any ID you can use to search for a matching firmware