Hovatek Forum MOBILE Android Infinix x608 Bootloop
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Infinix x608 Bootloop

Infinix x608 Bootloop

28-03-2021, 02:41 PM
#1



Please guys I really need your help.there's this infinix x608 my client brought to me, the problem is the phone is stuck In endless bootloop, sometimes it boot completely to the home page stays for 30sec-1min and then reboot itself .I have flash it using(miracle box, HQXA &QFIL)several times with firmware version v18&24 still that didn't resolve it...I don't know what to do anymore because the flashing completed successfully yet it still didn't work. I have even tick wipe selected partitions and erase the phone with miracle box, then reflash but same problem...
X3non
X3non
X3non
Recognized Contributor
22,062
29-03-2021, 11:03 AM
#2
(28-03-2021, 02:41 PM)Prince Benedict Please guys I really need your help.there's this infinix x608 my client brought to me, the problem is the phone is stuck In endless bootloop, sometimes it boot completely to the home page stays for 30sec-1min and then reboot itself .I have flash it using(miracle box, HQXA &QFIL)several times with firmware version v18&24 still that didn't resolve it...I don't know what to do anymore because the flashing completed successfully yet it still didn't work. I have even tick wipe selected partitions and erase the phone with miracle box, then reflash but same problem...

did you by any chance check the build number of the phone before flashing?
post full build number of the two firmwares you've tried so far and try flashing X608-QL1661ABCDEF-O-180406V11 @ https://www.hovatek.com/forum/thread-24298.html
29-03-2021, 09:35 PM
#3
Unfortunately I didn't check the previous build before flashing...i flashed this one (X608-QL1661D-O-IN-180816V18) [Factory / Signed] from hovatek and
X608-QL1661ABCDEF-O-181031V24 from romprovider.com both flashed successfully but it still bootloop
X3non
X3non
X3non
Recognized Contributor
22,062
30-03-2021, 09:29 AM
#4
(29-03-2021, 09:35 PM)Prince Benedict Unfortunately I didn't check the previous build before flashing...i flashed this one (X608-QL1661D-O-IN-180816V18) [Factory / Signed] from hovatek and
X608-QL1661ABCDEF-O-181031V24 from romprovider.com both flashed successfully but it still bootloop

you'll need to test the emmc to be sure that what you flashed is actually been written to the device
use miracle thunder to read_info and get the current build number from the device OR backup recovery partition and use method 7 @ https://www.hovatek.com/forum/thread-16005.html
flash a different firmware build then retrieve the build number from the phone again, confirm if you are getting the new build or the old build
30-03-2021, 05:08 PM
#5



Yeah I have confirmed if the firmware were actually written on the device, as at the time I flashed this build (X608-QL1661ABCDEF-O-181031V24), I boot to recovery and checked the current build and the build number tallies with the build above which means it was written same with (X608-QL1661D-O-IN-180816V18) .....I haven't encountered this kind of problem before which surprises me
X3non
X3non
X3non
Recognized Contributor
22,062
31-03-2021, 09:56 AM
#6
(30-03-2021, 05:08 PM)Prince Benedict Yeah I have confirmed if the firmware were actually written on the device, as at the time I flashed this build (X608-QL1661ABCDEF-O-181031V24), I boot to recovery and checked the current build and the build number tallies with the build above which means it was written same with (X608-QL1661D-O-IN-180816V18) .....I haven't encountered this kind of problem before which surprises me

look for and try a different firmware build
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram