Hovatek Forum MOBILE Android Tecno KC2 Requesting Auth file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno KC2 Requesting Auth file

Tecno KC2 Requesting Auth file

Pages (2): Previous 1 2
CloudRazor
CloudRazor
CloudRazor
Techie Member
43
04-01-2021, 07:40 PM
#11



Yes i do
This post was last modified: 04-01-2021, 07:41 PM by CloudRazor.
X3non
X3non
X3non
Recognized Contributor
22,062
05-01-2021, 09:54 AM
#12
(04-01-2021, 07:40 PM)CloudRazor Yes i do

what's the original build number of your device?
what are the files you have in your backup? you could share a screenshot of it's contents
CloudRazor
CloudRazor
CloudRazor
Techie Member
43
12-01-2021, 12:31 PM
#13
(05-01-2021, 09:54 AM)X3non
(04-01-2021, 07:40 PM)CloudRazor Yes i do

what's the original build number of your device?
what are the files you have in your backup? you could share a screenshot of it's contents

Oh my bad ... the phone model was a kc8 and i ended up flashing it with a kc2 firmware .... the backup i created isn't flashing fully though issues as just narrated above... From the recovery of the backup firmware (TECNO/H6110/TECNO-KC8 10/QP1A.190711.020/LMN-OP-201026V96) i looked for this Firmware but couldn't find it anywhere. i have tried KC8-H6110LMN-Q-OP-200907V21 and Tecno_Spark_4_KC8_MT6761_V111_191006 firmware but still the touch screen doesn't work. I have attached the screenshot of the backup files i have.
Attached Files
.png
Screenshot (88).png
Size: 190.83 KB / Downloads: 7
X3non
X3non
X3non
Recognized Contributor
22,062
12-01-2021, 08:35 PM
#14
(12-01-2021, 12:31 PM)CloudRazor Oh my bad ... the phone model was a kc8 and i ended up flashing it with a kc2 firmware .... the backup i created isn't flashing fully though issues as just narrated above... From the recovery of the backup firmware (TECNO/H6110/TECNO-KC8 10/QP1A.190711.020/LMN-OP-201026V96) i looked for this Firmware but couldn't find it anywhere. i have tried KC8-H6110LMN-Q-OP-200907V21 and Tecno_Spark_4_KC8_MT6761_V111_191006 firmware but still the touch screen doesn't work. I have attached the screenshot of the backup files i have.

can you post the contents of the prop.default from the stock recovery of this backup of yours in [quote] tags OR upload the file
your backup is full alright, if you are sure that this backup was made when the touchscreen still worked? because if you did and are able to flash the backup and touchscreen still doesnt work then you might be looking at a hardware problem
CloudRazor
CloudRazor
CloudRazor
Techie Member
43
12-01-2021, 11:20 PM
#15



(12-01-2021, 08:35 PM)X3non [quote="CloudRazor" pid='207316' dateline='1610451073']
Oh my bad ... the phone model was a kc8 and i ended up flashing it with a kc2 firmware .... the backup i created isn't flashing fully though issues as just narrated above... From the recovery of the backup firmware (TECNO/H6110/TECNO-KC8 10/QP1A.190711.020/LMN-OP-201026V96) i looked for this Firmware but couldn't find it anywhere. i have tried KC8-H6110LMN-Q-OP-200907V21 and Tecno_Spark_4_KC8_MT6761_V111_191006 firmware but still the touch screen doesn't work. I have attached the screenshot of the backup files i have.

can you post the contents of the prop.default from the stock recovery of this backup of yours in
Quote: tags OR upload the file
your backup is full alright, if you are sure that this backup was made when the touchscreen still worked? because if you did and are able to flash the backup and touchscreen still doesnt work then you might be looking at a hardware problem

As i mentioned in post #7 while trying to flash the backup of the firmware i created, the pgpt.bin could not flash citing writing error in miracle box (see attached screenshot) and in SP flash tools it writes the preloader successfully then presents the error partition not found ( check the screenshot too). All that after formatting all + Download. When I try to use the software download tool on the backup firmware, it forecloses then on relaunching it it shows an error (as attached below too). As for the prop.default I don't see the mentioned file from the files in the previous screenshot but i beleive the data you are looking for is either in the recovery.bin file or boot.bin file ( so i have included them both too).
Attached Files
.png
Screenshot (88).png
Size: 190.83 KB / Downloads: 4
.png
Screenshot (89).png
Size: 613.96 KB / Downloads: 3
.png
Screenshot (90).png
Size: 259.91 KB / Downloads: 4
.png
Screenshot (91).png
Size: 92.03 KB / Downloads: 3
CloudRazor
CloudRazor
CloudRazor
Techie Member
43
12-01-2021, 11:36 PM
#16
(12-01-2021, 11:20 PM)CloudRazor
(12-01-2021, 08:35 PM)X3non [quote="CloudRazor" pid='207316' dateline='1610451073']
Oh my bad ... the phone model was a kc8 and i ended up flashing it with a kc2 firmware .... the backup i created isn't flashing fully though issues as just narrated above... From the recovery of the backup firmware (TECNO/H6110/TECNO-KC8 10/QP1A.190711.020/LMN-OP-201026V96) i looked for this Firmware but couldn't find it anywhere. i have tried KC8-H6110LMN-Q-OP-200907V21 and Tecno_Spark_4_KC8_MT6761_V111_191006 firmware but still the touch screen doesn't work. I have attached the screenshot of the backup files i have.

can you post the contents of the prop.default from the stock recovery of this backup of yours in
Quote: tags OR upload the file
your backup is full alright, if you are sure that this backup was made when the touchscreen still worked? because if you did and are able to flash the backup and touchscreen still doesnt work then you might be looking at a hardware problem

As i mentioned in post #7 while trying to flash the backup of the firmware i created, the pgpt.bin could not flash citing writing error in miracle box (see attached screenshot) and in SP flash tools it writes the preloader successfully then presents the error partition not found ( check the screenshot too). All that after formatting all + Download. When I try to use the software download tool on the backup firmware, it forecloses then on relaunching it it shows an error (as attached below too). As for the prop.default I don't see the mentioned file from the files in the previous screenshot but i believe the data you are looking for is either in the recovery.bin file or boot.bin file ( so i have included them both too).

this is the link to the recovery.bin and boot.bin files since I could not upload the individual files https://mega.nz/file/zfBmWZaC#DxL6v9_8Gb...nl4DLmI__Y
X3non
X3non
X3non
Recognized Contributor
22,062
13-01-2021, 10:56 AM
#17
(12-01-2021, 11:20 PM)CloudRazor As i mentioned in post #7 while trying to flash the backup of the firmware i created, the pgpt.bin could not flash citing writing error in miracle box (see attached screenshot) and in SP flash tools it writes the preloader successfully then presents the error partition not found ( check the screenshot too). All that after formatting all + Download. When I try to use the software download tool on the backup firmware, it forecloses then on relaunching it it shows an error (as attached below too). As for the prop.default I don't see the mentioned file from the files in the previous screenshot but i beleive the data you are looking for is either in the recovery.bin file or boot.bin file ( so i have included them both too).

the main thing is that you made this backup when the device still had touch screen working and you are able to flash all the other files except pgpt back and that the phone boots to the same way it was just before you made this backup, i.e with same apps, contacts, phone log, messages e.t.c, if yes then take the device for proper hardware checkup
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram