[Please help] Kingrow K1 MT6763 Dead
[Please help] Kingrow K1 MT6763 Dead
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM12)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6763 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x03AB400000
Flash Type: EMMC
INT/EXT RAM Size: 0x40000/0x80000000
Writing(Nand/eMMC)...
Writing lk
Writing lk2
Writing boot
Writing logo
Writing odmdtbo
Writing tee1
Writing tee2
Writing vendor
ERROR0_5e
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6763 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x03AB400000
Flash Type: EMMC
INT/EXT RAM Size: 0x40000/0x80000000
Writing(Nand/eMMC)...
Writing md1dsp
Writing spmfw
Writing sspm_1
Writing sspm_2
Writing gz1
Writing gz2
Writing nvram
ERROR0_5e
(21-09-2020, 07:57 PM)Timo Helfer Hello,
I somehow bricked my Kingrow K1 E-Ink smartphone with a MT6763 chip.
First I thought I'm lucky since I did several READ operations with scatter file. But unfortunately when I want to write that full backup to my phone. I get "Error0_5e" mostly after partition nvdata, nvram, vendor etc. But some partitions write fine.
Phone is completely dead, not starting. When I plug it in, windows is switching drivers until I start in Miracle Box the Write operation. Already tried puting out the battery, didnt help.
Regards - Timo
PS: See attached the scatter file
Code:Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM12)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6763 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x03AB400000
Flash Type: EMMC
INT/EXT RAM Size: 0x40000/0x80000000
Writing(Nand/eMMC)...
Writing lk
Writing lk2
Writing boot
Writing logo
Writing odmdtbo
Writing tee1
Writing tee2
Writing vendor
ERROR0_5e
Code:Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6763 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x03AB400000
Flash Type: EMMC
INT/EXT RAM Size: 0x40000/0x80000000
Writing(Nand/eMMC)...
Writing md1dsp
Writing spmfw
Writing sspm_1
Writing sspm_2
Writing gz1
Writing gz2
Writing nvram
ERROR0_5e
(22-09-2020, 11:59 AM)Timo Helfer I'm not sure anymore, it happen some months back. Could be that I tried to flash a selfbrewed TWRP or something, and then I tried to reflash the backup with SP Flash tool? But I dont remember exactly.
The backups I have were all at a state where the phone was completely functioning. So they should be fine.
I tried to flash preloader seperately and in a second step flash all the other partitions, but I always get the "Error0_5e" after some specific partitions, like nvram, vendor etc.
Anything I could try? Unfortunately stock firmware is not available, since this is a niche phone and the vendor does not provide the firmware for download.
(23-09-2020, 09:20 AM)hovatek(22-09-2020, 11:59 AM)Timo Helfer I'm not sure anymore, it happen some months back. Could be that I tried to flash a selfbrewed TWRP or something, and then I tried to reflash the backup with SP Flash tool? But I dont remember exactly.
The backups I have were all at a state where the phone was completely functioning. So they should be fine.
I tried to flash preloader seperately and in a second step flash all the other partitions, but I always get the "Error0_5e" after some specific partitions, like nvram, vendor etc.
Anything I could try? Unfortunately stock firmware is not available, since this is a niche phone and the vendor does not provide the firmware for download.
Seems you made the backup using Miracle Thunder right? I'm asking this to confirm the source of the scatter file.
Some device's don't get along with firmware backups or dumps over factory firmware.
Try backup the dead phone's firmware using WWR 2.51 @ https://www.hovatek.com/forum/thread-21969.html as explained below. Lets see how it goes
(04-10-2020, 08:51 AM)Timo Helfer Sorry I was on vacation for 2 weeks. Thank youu for your support! I took the dump according to the youtube clip. Backed everything up until system partition, without user_data and cut the rom as it is. And now? Anything I can do now? Yes, the backup Ive done before were done with Miracle Thunder.
Regards - Timo
(08-10-2020, 08:24 PM)Timo Helfer Hey guys!
Thank you very much! This indeed helped to recover my phone!
(10-12-2020, 02:44 PM)Timo Helfer Can someone tell me which partitions I should provide to another Kingrow User, so he can use my backup and flash it with SPFT? I have injected Google Apps on mine, thats why its valueable to other users.
I assume my Scatter-File can also be used by other Kingrow K1 users, right?