formatting single partitions using transsion aftersale tool
formatting single partitions using transsion aftersale tool
(21-03-2020, 09:07 AM)Dilone61 Hi, I have a Huawei CRO-U-00 with FRP which I wish to format. I tried to format it using SP flash tool but unfortunately it requires a DA file. I downloaded a DA file from this forum but it fails to work. I also have another software called "transsion aftersale tool". Now, is it possible to format single partitions using transsion aftersale tool? And if yes, which method should I use? And the software is very accessible to people who are visually impaired like me unlike miracle box and research upgrade tool. Thanks.
(21-03-2020, 05:35 PM)X3non(21-03-2020, 09:07 AM)Dilone61 Hi, I have a Huawei CRO-U-00 with FRP which I wish to format. I tried to format it using SP flash tool but unfortunately it requires a DA file. I downloaded a DA file from this forum but it fails to work. I also have another software called "transsion aftersale tool". Now, is it possible to format single partitions using transsion aftersale tool? And if yes, which method should I use? And the software is very accessible to people who are visually impaired like me unlike miracle box and research upgrade tool. Thanks.
DA file usable in SP flash tool is now listed @ https://www.hovatek.com/forum/thread-23321.html
(21-03-2020, 11:55 PM)Dilone61(21-03-2020, 05:35 PM)X3non(21-03-2020, 09:07 AM)Dilone61 Hi, I have a Huawei CRO-U-00 with FRP which I wish to format. I tried to format it using SP flash tool but unfortunately it requires a DA file. I downloaded a DA file from this forum but it fails to work. I also have another software called "transsion aftersale tool". Now, is it possible to format single partitions using transsion aftersale tool? And if yes, which method should I use? And the software is very accessible to people who are visually impaired like me unlike miracle box and research upgrade tool. Thanks.
DA file usable in SP flash tool is now listed @ https://www.hovatek.com/forum/thread-23321.html
That's the one I initially used but it refused. I brought this up on Page 8 and was told that it can work in CM2 MTK.
I read somewhere that transsion aftersale tool does not require either Auth file or DA file. That's why I wanted to know whether I can use it to format only FRP partition.
(21-03-2020, 11:55 PM)Dilone61 That's the one I initially used but it refused. I brought this up on Page 8 and was told that it can work in CM2 MTK.
I read somewhere that transsion aftersale tool does not require either Auth file or DA file. That's why I wanted to know whether I can use it to format only FRP partition.
(22-03-2020, 04:37 PM)X3non(21-03-2020, 11:55 PM)Dilone61 That's the one I initially used but it refused. I brought this up on Page 8 and was told that it can work in CM2 MTK.
I read somewhere that transsion aftersale tool does not require either Auth file or DA file. That's why I wanted to know whether I can use it to format only FRP partition.
that's not the same file you used, i removed the old file not compatible with sp flash tool and replaced with sp flash tool compatible DA file. I even changed the name to the full device model "Huawei Y3 2017 CRO-U00 (sign & no-sign)" so it's easily recognizable that it's different
surely you'll notice this if you actually downloaded and tested the new file
(23-03-2020, 11:10 AM)Dilone61 Good! This one now worked but after I disabled checking of LIB-Da mismatch. But the problem now is SP flash tool says that this is a secure baseband chip, Please select an auth file before proceeding". Is there a work around? Or where can I download the auth file?
Thanks.
(23-03-2020, 05:51 PM)X3non(23-03-2020, 11:10 AM)Dilone61 Good! This one now worked but after I disabled checking of LIB-Da mismatch. But the problem now is SP flash tool says that this is a secure baseband chip, Please select an auth file before proceeding". Is there a work around? Or where can I download the auth file?
Thanks.
is your phone still able to power on?
which of the two DA files did you use that prompted this auth file error?
BTW since you're trying to remove frp, did you try the method in @innagee's reply?
(22-03-2020, 11:02 AM)innagee(21-03-2020, 11:55 PM)Dilone61(21-03-2020, 05:35 PM)X3non(21-03-2020, 09:07 AM)Dilone61 Hi, I have a Huawei CRO-U-00 with FRP which I wish to format. I tried to format it using SP flash tool but unfortunately it requires a DA file. I downloaded a DA file from this forum but it fails to work. I also have another software called "transsion aftersale tool". Now, is it possible to format single partitions using transsion aftersale tool? And if yes, which method should I use? And the software is very accessible to people who are visually impaired like me unlike miracle box and research upgrade tool. Thanks.
DA file usable in SP flash tool is now listed @ https://www.hovatek.com/forum/thread-23321.html
That's the one I initially used but it refused. I brought this up on Page 8 and was told that it can work in CM2 MTK.
I read somewhere that transsion aftersale tool does not require either Auth file or DA file. That's why I wanted to know whether I can use it to format only FRP partition.
Transsion tool does not have the format single partition feature.
Try the below manual method
(23-03-2020, 07:01 PM)Dilone61(22-03-2020, 11:02 AM)innagee(21-03-2020, 11:55 PM)Dilone61(21-03-2020, 05:35 PM)X3non(21-03-2020, 09:07 AM)Dilone61 Hi, I have a Huawei CRO-U-00 with FRP which I wish to format. I tried to format it using SP flash tool but unfortunately it requires a DA file. I downloaded a DA file from this forum but it fails to work. I also have another software called "transsion aftersale tool". Now, is it possible to format single partitions using transsion aftersale tool? And if yes, which method should I use? And the software is very accessible to people who are visually impaired like me unlike miracle box and research upgrade tool. Thanks.
DA file usable in SP flash tool is now listed @ https://www.hovatek.com/forum/thread-23321.html
That's the one I initially used but it refused. I brought this up on Page 8 and was told that it can work in CM2 MTK.
I read somewhere that transsion aftersale tool does not require either Auth file or DA file. That's why I wanted to know whether I can use it to format only FRP partition.
Transsion tool does not have the format single partition feature.
Try the below manual method
Oh! The problem with videos is that I'm visually impaired and they don't explain word by word what they do. Many things they just show and not explain.